Specifications - Lord and Son Construction, Inc.

SECTION 23 09 23
DIRECT DIGITAL CONTROL FOR HVAC AND OTHER LOCAL BUILDING SYSTEMS
12/09
PART 1
GENERAL
1.1 REFERENCES
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AIR MOVEMENT AND CONTROL ASSOCIATION INTERNATIONAL (AMCA)
AMCA 500-D
(1998) Laboratory Methods of Testing Dampers
for Rating
AMERICAN SOCIETY OF HEATING, REFRIGERATING AND AIR-CONDITIONING
ENGINEERS (ASHRAE)
ASHRAE FUN IP
(2009) Fundamentals Handbook, I-P Edition
ASME INTERNATIONAL (ASME)
ASME B16.15
ASME B16.34
ASME B40.100
(2006) Cast Bronze Threaded Fittings Classes
125 and 250
(2009) Valves - Flanged, Threaded and Welding
End
(2005) Pressure Gauges and Gauge Attachments
ASTM INTERNATIONAL (ASTM)
ASTM A 269
ASTM B 88
ASTM B 88M
ASTM D 1693
ASTM D 635
(2008) Standard Specification for Seamless
and Welded Austenitic Stainless Steel Tubing
for General Service
(2009) Standard Specification for Seamless
Copper Water Tube
(2005) Standard Specification for Seamless
Copper Water Tube (Metric)
(2008) Standard Test Method for Environmental
Stress-Cracking of Ethylene Plastics
(2006) Standard Test Method for Rate of
Burning and/or Extent and Time of Burning of
Self-Supporting Plastics in a Horizontal
Position
CONSUMER ELECTRONICS ASSOCIATION (CEA)
Section 23 09 23 Page 1