Specifications - Lord and Son Construction, Inc.

HYDRAULIC INSTITUTE (HI)
HI 1.1-1.2
(2000) Centrifugal Pump Nomenclature
MANUFACTURERS STANDARDIZATION SOCIETY OF THE VALVE AND FITTINGS
INDUSTRY (MSS)
MSS SP-110
MSS SP-25
MSS SP-58
MSS SP-67
MSS SP-69
MSS SP-70
MSS SP-71
MSS SP-72
MSS SP-78
MSS SP-80
MSS SP-85
(1996) Ball Valves Threaded, Socket-Welding,
Solder Joint, Grooved and Flared Ends
(2008) Standard Marking System for Valves,
Fittings, Flanges and Unions
(2009) Standard for Pipe Hangers and Supports
- Materials, Design and Manufacture
(2002a; R 2004) Standard for Butterfly Valves
(2003; R 2004) Standard for Pipe Hangers and
Supports - Selection and Application
(2006) Standard for Cast Iron Gate Valves,
Flanged and Threaded Ends
(2005) Standard for Gray Iron Swing Check
Valves, Flanged and Threaded Ends
(1999) Standard for Ball Valves with Flanged
or Butt-Welding Ends for General Service
(2005a) Cast Iron Plug Valves, Flanged and
Threaded Ends
(2008) Bronze Gate, Globe, Angle and Check
Valves
(2002) Standard for Cast Iron Globe & Angle
Valves, Flanged and Threaded Ends
NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION (NEMA)
NEMA 250
NEMA MG 1
NEMA MG 11
(2008) Enclosures for Electrical Equipment
(1000 Volts Maximum)
(2007; Errata 2008) Standard for Motors and
Generators
(1977; R 2007) Energy Management Guide for
Selection and Use of Single Phase Motors
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)
NFPA 90A
(2008; Errata 2009) Standard for the
Installation of Air Conditioning and
Ventilating Systems
Section 23 64 26 Page 4