Specifications - Lord and Son Construction, Inc.

ASTM C 921
ASTM D 774/D 774M
ASTM D 882
ASTM E 2231
ASTM E 84
ASTM E 96/E 96M
(2009) Standard Practice for Determining the
Properties of Jacketing Materials for Thermal
Insulation
(1997; R 2007) Bursting Strength of Paper
(2009) Tensile Properties of Thin Plastic
Sheeting
(2009) Specimen Preparation and Mounting of
Pipe and Duct Insulation Materials to Assess
Surface Burning Characteristics
(2009c) Standard Test Method for Surface
Burning Characteristics of Building Materials
(2005) Standard Test Methods for Water Vapor
Transmission of Materials
MANUFACTURERS STANDARDIZATION SOCIETY OF THE VALVE AND FITTINGS
INDUSTRY (MSS)
MSS SP-69
(2003; R 2004) Standard for Pipe Hangers and
Supports - Selection and Application
MIDWEST INSULATION CONTRACTORS ASSOCIATION (MICA)
MICA Insulation Stds
(1999) National Commercial & Industrial
Insulation Standards
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)
NFPA 255
NFPA 90A
NFPA 90B
(2005; Errata 2006) Standard Method of Test
of Surface Burning Characteristics of
Building Materials
(2008; Errata 2009) Standard for the
Installation of Air Conditioning and
Ventilating Systems
(2008) Installation of Warm Air Heating and
Air Conditioning Systems
U.S. DEPARTMENT OF DEFENSE (DOD)
MIL-A-3316
(Rev C; Am 2) Adhesives, Fire-Resistant,
Thermal Insulation
UNDERWRITERS LABORATORIES (UL)
UL 723
(2008) Standard for Test for Surface Burning
Characteristics of Building Materials
1.2 SYSTEM DESCRIPTION
Section 23 07 00 Page 3