Specifications - Lord and Son Construction, Inc.

SECTION 10 21 13 – TOILET COMPARTMENTS
PART 1 – GENERAL
1.1 SUMMARY
1.2 SUBMITTALS
A. Compartment work includes the following where indicated on the Drawings:
1. Floor mounted, overhead braced toilet compartments.
2. Hardware for toilet compartments and partitions.
A. Shop Drawings: Submit shop drawings of toilet partitions for approval prior to
fabrication.
B. Color Samples: Submit full range of color samples for toilet compartments and
urinal screens.
1.3 QUALITY ASSURANCE
A. Field Measurements: Take field measurements prior to preparation of shop
drawings and fabrication where possible to ensure proper fitting of work. However,
allow for adjustments within specified tolerance wherever taking of field
measurements before fabrication might delay work.
B. Coordination: Furnish inserts and anchorages which must be built into other work
for installation of compartments and cubicles and related work; coordinate delivery
with other work to avoid delays.
1.4 DELIVERY, STORAGE, AND HANDLING
A. Deliver pre-finished materials to the project site in original, unopened cartons or
other packaging materials necessary to protect structure and finishes.
1. Label packages clearly with manufacturer’s name and item description.
2. Store materials in such packaging until installation.
1.5 PROJECT CONDITIONS
A. Building shall be enclosed and provide complete protection from outside weather
prior to installation.
MAHG121038 10 21 13 - 1 TOILET COMPARTMENTS