Specifications - Lord and Son Construction, Inc.

SECTION 10 14 00 – SIGNAGE
PART 1 – GENERAL
1.1 SUMMARY
1.2 SUBMITTALS
A. This Section includes the following identifying devices:
1. Room identification
2. Aluminum letters
B. Refer to Schedule at end of Section for locations of signage.
A. Submit product data for all signs.
B. Submit schedule of all signs and shop drawings listing sign size, letterform, and
letter heights. Include construction details, layouts, size, and mounting methods.
C. Provide a layout plan showing location of each type of sign.
D. Provide one sample of EACH sign types for verification of materials, color, pattern,
overall quality, and for adherence to drawings and requirements indicated.
E. Provide patterns as needed for installation.
1.3 QUALITY ASSURANCE
A. All identifying devices shall comply with requirements of 36 CFR 1191 "Americans
with Disabilities Act Accessory Guidelines for Buildings and Facilities".
B. Manufacturer specializing in manufacturing the products specified in this section
with minimum five years experience. Obtain signs from one source and a single
manufacturer.
1.4 DELIVERY, STORAGE, AND PROTECTION
1.5 WARRANTY
A. Package to prevent damage or deterioration during shipment, handling, storage
and installation.
B. Products should remain in original packaging until removal is necessary. Store
products in a dry, indoor location.
A. Provide manufacturer’s warranty against defects in materials or workmanship for
minimum 5 years.
MAHG121038 10 14 00 - 1 SIGNAGE