Specifications - Lord and Son Construction, Inc.

SECTION 23 07 00
THERMAL INSULATION FOR MECHANICAL SYSTEMS
11/09
PART 1
GENERAL
1.1 REFERENCES
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only. At the discretion of the Government, the
manufacturer of any material supplied will be required to furnish test
reports pertaining to any of the tests necessary to assure compliance with
the standard or standards referenced in this specification.
AMERICAN SOCIETY OF HEATING, REFRIGERATING AND AIR-CONDITIONING
ENGINEERS (ASHRAE)
ASHRAE 90.1 - IP
(2007; Supplement 2008; Errata 2009; Errata
2009; INT 1-3 2009) Energy Standard for
Buildings Except Low-Rise Residential
Buildings, I-P Edition
ASTM INTERNATIONAL (ASTM)
ASTM A 167
ASTM A 240/A 240M
ASTM A 580/A 580M
ASTM B 209
ASTM C 1126
ASTM C 1136
ASTM C 1290
(1999; R 2009) Standard Specification for
Stainless and Heat-Resisting Chromium-Nickel
Steel Plate, Sheet, and Strip
(2009c) Standard Specification for Chromium
and Chromium-Nickel Stainless Steel Plate,
Sheet, and Strip for Pressure Vessels and for
General Applications
(2008) Standard Specification for Stainless
Steel Wire
(2007) Standard Specification for Aluminum
and Aluminum-Alloy Sheet and Plate
(2004) Standard Specification for Faced or
Unfaced Rigid Cellular Phenolic Thermal
Insulation
(2009) Standard Specification for Flexible,
Low Permeance Vapor Retarders for Thermal
Insulation
(2006e1) Standard Specification for Flexible
Fibrous Glass Blanket Insulation Used to
Externally Insulate HVAC Ducts
Section 23 07 00 Page 1