Operating Manual Vol 1 - ES Documentation

SMIQAnalog Modulations2.7.4 Phase ModulationMenu ANALOG MOD-PM offers access to settings for phase modulation.Note:The PM and FM modulations cannot be set simultaneously and deactivate one another.Menu selection:ANALOG MOD - PMFREQ 100. 000 000 0 MHz LEVEL - 30.0 dBmFREQUENCYLEVELANALOG MODVECTOR MODDIGITAL MODDIGITAL STDLF OUTPUTSWEEPLISTMEM SEQUTILITIESAMBB-AMFMPMPULSEPM1 DEVIATIONPM1 SOURCELFGEN FREQPM2 DEVIATIONPM2 SOURCEEXT1 COUPLINGEXT2 COUPLING1.00 radOFF INT EXT1 EXT21.000 0 kHz1.00 radOFF EXT1 EXT2ACACDCDCFig. 2-30Menu ANALOG MOD - PM (preset setting), fitted with option SM-B5, FM/PM-modulatorPM1 DEVIATIONPM1 SOURCELFGEN1 FREQPM2 DEVIATIONPM2 SOURCEEXT1 COUPLINGEXT2 COUPLINGInput value of the deviation for PM1.IEC/IEEE-bus command SOUR:PM1 1RADSwitching on and off PM1 and selection of the modulation source.IEC/IEEE-bus command SOUR:PM1:SOUR:INT; STAT ONInput value of the frequency of the LF generator.IEC/IEEE-bus command SOUR:PM1:INT:FREQ 1kHzInput value of the deviation for PM2.IEC/IEEE-bus command SOUR:PM2 1RADSwitching on and off PM2 and selection of the modulation source.IEC/IEEE-bus command SOUR:PM2:SOUR INT; STAT ONSelection of the type of coupling AC or DC with external supply for PM1 (inputEXT1).IEC/IEEE-bus command SOUR:PM:EXT1:COUP ACSelection of the type of coupling AC or DC with external supply for PM2 (inputEXT2).IEC/IEEE-bus command SOUR:PM:EXT2:COUP AC1125.5555.03 2.63E-8