Operating Manual Vol 1 - ES Documentation

Digital Standard IS-95 CDMASMIQ2.12.4 Menu IS-95 CDMA Standard - Forward Link SignalMenu DIGITAL STD - IS-95 provides access to settings for IS-95 CDMA signal generation. Thefollowing figure shows the menu for generating the forward link signal (transmit signal of base station) inthe FWD_LINK_18 mode. The menus for generating reverse link signals are described in the followingsection. Parameters that are identical for both modes are explained in the menu for forward link.Menu selection:DIGITAL STD - IS-95- MODE - FWD_LINK_18FREQIS95100. 000 000 0 MHzLEVEL -30.0 dBmPEP - 13.9dBmFREQUENCYLEVELANALOG MODVECTOR MODDIGITAL MODDIGITAL STDLF OUTPUTSWEEPLISTMEM SEQUTILITIESPHSIS-95STATEMODE...SET DEFAULTMODULATION...TRIGGER MODE...EXECUTE TRIGGERTRIGGER....CLOCK...TOTAL POWERADJUST TOTAL POWERSAVE/RCL MAPPING...OFFONFWD_LINK_18QPSK IS-95AUTOINTINT0.00 dBCHANNEL NO. WALSH CODE POWER [dB] DATA STATE0 (PILOT) 0 -7.0 0000 ON1 32 -13.0 PRBS ON2 1 -7.3 PRBS ON3 9 -10.3 PRBS ON4 10 -10.3 PRBS ON5 11 -10.3 PRBS ON6 12 -10.3 PRBS ON7 17 -10.3 PRBS ON8 25 -10.3 PRBS ON9 33 -10.3 PRBS OFF10 34 -10.3 PRBS OFF11 35 -10.3 PRBS OFF12 36 -10.3 PRBS OFF13 37 -10.3 PRBS OFF14 38 -10.3 PRBS OFF15 39 -10.3 PRBS OFF16 40 -10.3 PRBS OFF17 41 -10.3 PRBS OFFFig. 2-81Menu DIGITAL STD - IS-95 - MODE - FWD_LINK_18, equipped with optionsmodulation coder SMIQB20, data generator SMIQB11 and SMIQB42STATESwitch on/off of modulation Digital Standard IS-95 CDMA. Vector modulationand digital modulation will be switched off automatically.IEC/IEEE-bus command SOUR:IS95:STAT ON1125.5555.03 2.136E-9