Operating Manual Vol 1 - ES Documentation

SMIQFitting the Options1.3.2 Overview of the SlotsFROFrequency extension 4 GHz/6 GHzIQMODIQCONSUMDSYNREFSSMCODDGENFSIM1 / FMOD / NDSIMFSIM2 / FMOD / NDSIMPOWS1ATTCOption SM-B1FRO = front unitFMOD = FM/PM modulatorIQMOD = I/Q modulatorIQCON = I/Q converterSUM = summing loopDSYN = digital synthesisREFSS = reference/step synthesisMCOD = modulation coderDGEN = data generatorFSIM = fading simulatorPOWS1 = power supplyATTC = attenuatorNDSIM = Noise generator anddistortion simulatorFig. 1-1SMIQ, view from the top1.3.3 Option SM-B1 - Reference Oscillator OCXOFitting the option½ Fasten the option at the back end of the lateral opening by means ofthe screw threads provided there.½ If the two last slots are both occupied, one of these modules mustbe removed temporarily.½ Feed ribbon cable W710 through the rear square cut-out to themotherboard, insert into connector X22 and snap in the locking.½ Feed coaxial cable W170 from socket X711 of the option throughthe second cut-out along the rear transverse panel to connectorX74 at the A7 module, reference/step synthesis, via themotherboard and insert there.1125.5555.03 1.5E-7