Operating Manual Vol 1 - ES Documentation

Digital Standard PDCSMIQ(SELECT SLOT...)VOX(UPLINK ONLY)SYNC2Input value for the 20 bit sync word in the first slot of asuperframe in hexadecimal form. This sync word marks thebeginning of a superframe. The input field is only displayed ifSUPERFRAME is switched on. Depending on the selectedslot, the following sync words are predefined according to thePDC standard:Slot No. VOX Sync2 Word0 CE4501 E1A902 18ED33 043E04 7D861IEC/IEEE-bus command :SOUR:PDC:SLOT2:SYNC E1A91CC Input value of the 8 bit data field " Color code ".IEC/IEEE-bus command :SOUR:PDC:SLOT2:CCOD #HFFSF Input value of the data field " Steal Flag ".IEC/IEEE-bus command :SOUR:PDC:SLOT2:SF #H0SACCHRCHG2Selection of data source for SACCH field (Slow AssociatedControl Channel).PN.. PRBS data according to CCITT with periodsbetween 2 9 -1 and 2 23 -1.IEC/IEEE :SOUR:PDC:SLOT3:SACC PN15DLIST Data from a programmable data list.IEC/IEEE :SOUR:PDC:SLOT3:SACC DLISSERDATA Data from data input SER DATA.IEC/IEEE :SOUR:PDC:SLOT3:SACC SDATSelection of data source for the RCH data field. RCH datareplace SACCH data in certain slots of a superframe. Theinput field is only displayed if SUPERFRAME is switched on.PN.. PRBS data according to CCITT with periodsbetween 2 9 -1 and 2 23 -1.IEC/IEEE :SOUR:PDC:SLOT3:RCH PN9DLIST Data from a programmable data list.IEC/IEEE :SOUR:PDC:SLOT3:RCH DLISSERDATA Data from data input SER DATA.IEC/IEEE :SOUR:PDC:SLOT3:RCH SDATDisplay of data contents in the 118 bit "Guard" field at theend of the slot in hexadecimal form. The field is onlydisplayed with LINK DIRECTION = UPLINK selected.Parameter SELECT DATA LIST... to EDIT DATA LIST...see menu selection BURST TYPE = TCH1125.5555.03 2.300 E-9