Operating Manual Vol 1 - ES Documentation

SMIQDigital Standard IS-95 CDMA(SAVE/RCLMAPPING...)SAVE MAPPING...DELETE MAPPING...Stores the channel configuration. For remote control,a name with 7 characters at max. can be used.IIEEE-bus :SOUR:IS95:MAPP:STOR "name"Deletes a stored channel configuration.IEEE bus :SOUR:IS95:MAPP:DEL "name"CHANNEL NOWALSH CODEPOWERDATASTATEDisplay of channel number.This menu column is only displayed in the forward link mode.Setting the Walsh code.This menu column is only displayed in the forward link mode.For FWD_LINK_18- the Walsh code can be set individually for each channel.IEC/IEEE-bus command :SOUR:IS95:CHAN1:WALS 32For FWD_LINK_64- the Walsh code cannot be set. In this mode, the Walsh code corresponds tothe channel number. All the 64 code channels are displayed.Setting the power of channel.This menu column is only displayed in the forward link mode.POWER indicates the average power of the code channel relative to thepower indicated in LEVEL display (code domain power).For FWD_LINK_18- the power of channels 0, 1, 2 is set individually.- the other channels have the same power. The power for all the channels isset in channel 3.For FWD_LINK_64- the power of the pilot channel is set individually.- the other channels have the same power. The power for all the channels isset in channel 1.IEC/IEEE-bus command :SOUR:IS95:CHAN1:POW -10 DBSetting the modulation data for the selected code channel.This menu column is only displayed in the forward link mode.The data rate for all forward link channels corresponds to the chip rate/64, ie19200 bps at a chip rate of 1.2288 Mcps0000 Continuous sequence of zerosIEC/IEEE-bus command SOUR:IS95:CHAN1:DATA ZERO1111 Continuous sequence of onesIEC/IEEE-bus command SOUR:IS95:CHAN1:DATA ONE1010 Alternating sequence of zeros and onesIEC/IEEE-bus command SOUR:IS95:CHAN1:DATA ALTPRBS Pseudo random data, different in every code channelIEC/IEEE-bus command SOUR:IS95:CHAN1:DATA PRBSSwitch on/off of assigned code channel.This menu column is only displayed in the forward link mode.IEC/IEEE-bus command :SOUR:IS95:CHAN1:STAT ON1125.5555.03 2.145E-9