Operating Manual Vol 1 - ES Documentation

SMIQ Digital Standard W-CDMA (NTT DoCoMo/ARIB 0.0)POWERInput value for channel powerPOWER indicates the average power of the I or Q code channel component inrelation to the power indicated in the LEVEL display (Code Domain Power).The setting values for the I and Q code channels having the same channelnumber should always be identical.For MODE - 4CHAN- the power of channels 0, 1, 2 and 3 is set separately.For MODE - 8CHAN- the power of channel 0 is set separately.- the other channels have the same power. The power for all the channels isset, for instant, in channel 1.For MODE - 15CHAN- Since all channels have the same power, they cannot be set. POWER isonly a display parameter in this case.When this value is modified, the value of TOTAL POWER is automaticallyadapted if STATE = ON.IEC/IEEE-bus command :SOUR:WCDM:CHAN4:I:POW -6DATA...Opens a window for selecting data sources and setting a data offset. The firstline of the window indicates the code channel for which the settings are done(DATA CONFIGURATION OF CHANNEL NO).The data source, the data offset and TPC can be separately set for the I andQ channel.DATASelection of the data source for the DATA field of aDPDCH channel.PN..PRBS data to CCITT with period lengthsbetween 2 9 -1 and 2 16 -1.DLIST Data from a list previously programmedand stored. Programming is performed inthe menu DIGITAL MOD - SOURCE -EDIT DATA LISTIEC/IEEE-bus :SOUR:WCDM:CHAN4:I:DATA PN15DATA OFFSETEntry value for a data offset in units of symbolduration. The admissible range is as large as thelength of a radio frame. The entry of a data offsetshifts in time the modulation data with respect to thespread code.IEC/IEEE-bus :SOUR:WCDM:CHAN4:I:DATA:OFFS 21125.5555.03 2.167E-9