Operating Manual Vol 1 - ES Documentation

SMIQDigital Standard NADC(SELECT SLOT...)TCHSYNCSACCHCDVCCRSVD(DOWNLINK only)SELECT DATALIST...COPY CURRENTDATA LIST TO...Input value for the 28 bit sync word in hexadecimal form.Depending on the selected slot, the following sync words arepredefined according to the NADC standard:SLOT 1 A91DE4ASLOT 2 A9D127ASLOT 3 C7E3C0CSLOT 4 342C3F3SLOT 5 13E23D1SLOT 6 DC2EC1DIEC/IEEE-bus :SOUR:NADC:SLOT2:SYNC A91EE4ASelection of data source for SACCH field (Slow AssociatedControl Channel).PN.. PRBS data according to CCITT with periodsbetween 2 9 -1 and 2 23 -1.IEEE :SOUR:NADC:SLOT3:SACC PN15DLIST Data from a programmable data list.IEEE :SOUR:NADC:SLOT3:SACC DLISSERDATA Data from data input SER DATA.IEEE :SOUR:NADC:SLOT3:SACC SDATInput value for the 12 bit "Coded digital verification colorcode" field in hexadecimal form. SMIQ does not perform anycoding but directly accepts the input data. 013 hex. is preset.This corresponds to a value of 1 for the uncoded colour codeDVCC.IEC/IEEE-bus :SOUR:NADC:SLOT2:CDVC #HFFFInput value for the 12 bit "Reserved" field in hexadecimalform.IEC/IEEE-bus :SOUR:NADC:SLOT2:CDVC #HFFFOpens a window for selecting a stored data list or forgenerating a new list.Stores the current data list under a different name.DELETE DATALIST...EDIT DATALIST...Deletes a data list.Opens a window for editing a data list bit-by-bit. Theavailable storage capacity and the length of the current list isdisplayed in parameters FREE and LEN (see also SectionList Editor).COPY Copies a list rangeFILL Fills the range with filler patternINSERT Inserts a list range at a different position of thelistDELETE Deletes a list rangeEDIT/VIEW Edits or views the list1125.5555.03 2.275 E-9