Operating Manual Vol 1 - ES Documentation

SMIQExternal Modulation Source AMIQ(SAVE/RECALLSETTINGS...)SAVE SETTING... Saves the current AMIQ setup. An already existingsetup can be selected and overwritten in a selectwindow.A new setup is created by selecting CREATE NEWSETTING . SMIQ automatically offers SETTxx withxx being in the range from 0 to 99. This name can bemodified any time as required.DELETE SETTING... Deletes AMIQ setups. The available setups areoffered in a select window.SELECTWAVEFORM/EXECUTE BATCH...Opens a window to− load signal data from diskette or hard disk into the AMIQ internal memory,− transfer signal data generated by WinIQSIM to the AMIQ hard disk,− display current signal data.FREQ 100. 000 000 0 MHz LEVEL - 30.0 dBmFREQUENCYLEVELANALOG MODVECTOR MODDIGITAL MODDIGITAL STDAMIQ CTRLLF OUTPUTSWEEPLISTMEM SEQSETUP... DRIVESAVE/RECALLWAVEFORM...SELECT WAVEMODE EXECUTE BATCH FROM FLOPPYEXECUTE SINFile InfoEXT TRIG SLCREATION DATE:FILTER COMMENT:LEVEL... MODULATED POWER OFFSET:MARKER... COPYRIGHT:REFERENCE OFLOPPYHARDDISKNONENONENONENONENONEFig. 2-230Menu AMIQ - SELECT WAVEFORM/EXECUTE BATCH...(SELECTWAVEFORM/EXECUTE BATCH...)DRIVEDIRECTORY...Selects storage medium with the signal data to beactivated.Selects the directory comprising the required signaldata on the AMIQ hard disk. The directory structureis freely selectable and can be modified withWinIQSIM. SMIQ does not allow to change thedirectory structure.The menu item is only visible with DRIVE =HARDDISK.1125.5555.03 2.361E-9