Operating Manual Vol 1 - ES Documentation

More documents

Recommendations

Info

$Print Preview - C:\DOCUME~1\f34892\LOCALS~1\Temp\.aptcache ...$

Enhanced Functions For Digital Standard 3GPP W-CDMA (FDD)SMIQTPCMULTI COD<strong>ES</strong>ELECT DATA LIST...CURRENT: DLIST01COPY CURRENTDATA LIST TO...DELETE DATA LIST...EDIT DATA LIST...Selects the data source for the TPC fields of the timeslots of thecorresponding enhanced channel.In a submenu the data sources ALL0, ALL1 and a 24-bit PATTERN as well asany data lists DLISTxx can be selected.Only one bit is read out from the data source per TPC field. This bit is thenmultiplied in the whole TPC field.IEC/IEEE-bus :SOUR:W3GP:BST:ENH:CHAN1:TPC ONEIEC/IEEE-bus :SOUR:W3GP:BST:ENH:CHAN1:TPC:PATT #H3F, 8Switch with which the multicode channel trunking of the correspondingdownlink enhanced channel can be activated or deactivated with otherdedicated channels.All dedicated channels of a base station whose multicode switch is set to ONare trunked to form one virtual channel – irrespective of whether they aredeclared as enhanced dedicated channels or as normal dedicated channels.IEC/IEEE-bus command :SOUR:W3GP:BST:ENH:CHAN1:MCOD OFFSelects an available data list or generation of a new data list (in the submenu).The currently selected data list is displayed on the right.IEC/IEEE-bus command :SOUR:W3GP:BST:ENH:DSEL 'ABC'Copies the contents of the current data list into an existing or new data list.IEC/IEEE-bus command :SOUR:DM:DLIS:COPY 'ABC'Deletes an existing data list.IEC/IEEE-bus command :SOUR:DM:DLIS:DEL 'ABC'Edits an existing data list.1125.5555.03 2.252 E-9
SMIQEnhanced Functions For Digital Standard 3GPP W-CDMA (FDD)2.15.3.2 UplinkOnly the uplink parameters are described here. If the parameters of section 2.15.3.1 are also availablein the uplink, :BST has to be replaced by :MST for the corresponding remote-control command.Fig. 2-172 DIGITAL STD - WCDMA/3GPP - ENHANCED CHANNELS STATE (uplink) menu1125.5555.03 2.253E-9
Page 1:
Test and MeasurementDivisionOperati
Page 4 and 5:
Introduction on how to use the manu
Page 7 and 8:
SMIQContentsContents1 Preparation f
Page 9 and 10:
SMIQContents2.7.3.2 Preemphasis....
Page 11 and 12:
SMIQContents2.15 Enhanced Functions
Page 13 and 14:
SMIQContents2.29 Utilities.........
Page 16 and 17:
ContentsSMIQ3.7.4 Application of th
Page 18 and 19:
ContentsSMIQ5.3.9.2 AM Distortion .
Page 20 and 21:
ContentsSMIQC Annex C..............
Page 22 and 23:
ContentsSMIQFiguresFig. 1-1 SMIQ, v
Page 24 and 25:
ContentsSMIQFig. 2-81 Menu DIGITAL
Page 26 and 27:
ContentsSMIQFig. 2-168 DIGITAL STD
Page 28 and 29:
ContentsSMIQFig. 2-244 Menu MEM SEQ
Page 30 and 31:
Safety Instructions10. Ensure that
Page 33 and 34:
1125.5555.03 1.1E-7SMIQPutting into
Page 35 and 36:
1125.5555.03 1.3E-7SMIQFunctional T
Page 37 and 38:
SMIQFitting the Options1.3.2 Overvi
Page 39 and 40:
SMIQFitting the Options1.3.5 Option
Page 41 and 42:
SMIQFitting the OptionsFitting the
Page 43 and 44:
SMIQFitting the OptionsFitting the
Page 45 and 46:
SMIQFitting the OptionsX606 X605 X6
Page 47 and 48:
SMIQFitting the OptionsConnectorThe
Page 49 and 50:
SMIQFront Panel2 Operation2.1 Front
Page 51 and 52:
SMIQFront Panel2.1.2 Controls and I
Page 53 and 54:
SMIQFront Panel2 DATA INPUTUnit key
Page 55 and 56:
SMIQFront Panel3 MENU/VARIATIONRota
Page 57 and 58:
SMIQFront Panel4QQInput external mo
Page 59 and 60:
SMIQFront Panel7Brightness and cont
Page 61 and 62:
SMIQRear Panel2.1.3 Elements of the
Page 63 and 64:
SMIQRear Panel11PAR DATAPinDescript
Page 65 and 66:
SMIQRear Panel12DATA DATA Cut-out,
Page 67 and 68:
SMIQRear Panel15BER Interface for B
Page 69 and 70:
SMIQRear Panel20RF RF Cut-out, prov
Page 71 and 72:
SMIQBasic Operating StepsMenu field
Page 73 and 74:
SMIQBasic Operating StepsQuick sele
Page 75 and 76:
SMIQSample Setting for First Users2
Page 77 and 78:
SMIQSample Setting for First UsersO
Page 79 and 80:
SMIQSample Setting for First UsersO
Page 81 and 82:
SMIQList EditorDELETE LISTFUNCTIONO
Page 83 and 84:
SMIQList Editor2.2.11.3 Edition of
Page 85 and 86:
SMIQList EditorFILL ATPARAMETERMEMO
Page 87 and 88:
SMIQList EditorBlock function DELET
Page 89 and 90:
SMIQList EditorOperating stepsExpla
Page 91 and 92:
SMIQSave/Recall2.2.12 Save/Recall -
Page 93 and 94:
SMIQRF Frequency2.4 RF FrequencyThe
Page 95 and 96:
SMIQRF Level2.5 RF LevelThe RF leve
Page 97 and 98:
SMIQRF LevelEXCLUDE FROM RCL OFF Th
Page 99 and 100:
SMIQRF LevelMenu selection:LEVEL -
Page 101 and 102:
SMIQRF LevelMenu selection:LEVEL -
Page 103 and 104:
SMIQModulation - General2.6 Modulat
Page 105 and 106:
SMIQModulation - General2.6.2 LF Ge
Page 107 and 108:
SMIQAnalog Modulations2.7 Analog Mo
Page 109 and 110:
SMIQAnalog Modulations2.7.3 Frequen
Page 111 and 112:
SMIQAnalog Modulations2.7.4 Phase M
Page 113 and 114:
SMIQAnalog Modulations2.7.5 Pulse M
Page 115 and 116:
SMIQVector ModulationMenu selection
Page 117 and 118:
SMIQVector Modulation2.8.1 I/Q Impa
Page 119 and 120:
SMIQFading Simulation2.9.1 Output P
Page 121 and 122:
SMIQFading Simulation2.9.4.1 Menu S
Page 123 and 124:
SMIQFading SimulationPATHThe follow
Page 125 and 126:
SMIQFading SimulationCORR PATHSwitc
Page 127 and 128:
SMIQFading Simulation3GPP_BS_4.1.0_
Page 129 and 130:
SMIQFading Simulation2.9.4.3 Menu M
Page 131 and 132:
SMIQFading Simulation2.9.4.4 Menu B
Page 133 and 134:
SMIQFading Simulation2.9.5 Test pro
Page 135 and 136:
SMIQDigital Modulation2.10.1 Digita
Page 137 and 138:
SMIQDigital Modulation2.10.1.3 FSK
Page 139 and 140:
SMIQDigital ModulationDifferential
Page 141 and 142:
SMIQDigital ModulationControl Lists
Page 143 and 144:
Page 145 and 146:
SMIQDigital Modulation2.10.5.2 Exte
Page 147 and 148:
SMIQDigital Modulation2.10.6 Envelo
Page 149 and 150:
Page 151 and 152:
SMIQDigital Modulation(SOURCE... )
Page 153 and 154:
SMIQDigital Modulation(MODULATION..
Page 155 and 156:
SMIQDigital Modulation(FILTER...) F
Page 157 and 158:
SMIQDigital ModulationTRIGGER MODES
Page 159 and 160:
SMIQDigital Modulation(CLOCK...) CL
Page 161 and 162:
SMIQDigital Modulation(POWER RAMPCO
Page 163 and 164:
SMIQDigital Standard PHS2.11 Digita
Page 165 and 166:
SMIQDigital Standard PHS2.11.2 PN G
Page 167 and 168:
SMIQDigital Standard PHS2.11.5 Menu
Page 169 and 170:
SMIQDigital Standard PHSFREQPHS100.
Page 171 and 172:
SMIQDigital Standard PHSCLOCK...Ope
Page 173 and 174:
SMIQDigital Standard PHSSLOT ATTENU
Page 175 and 176:
SMIQDigital Standard PHS(SELECT SLO
Page 177 and 178:
SMIQDigital Standard PHS(SELECT SLO
Page 179 and 180:
SMIQDigital Standard IS-95 CDMATo g
Page 181 and 182:
SMIQDigital Standard IS-95 CDMA2.12
Page 183 and 184:
SMIQDigital Standard IS-95 CDMA2.12
Page 185 and 186:
SMIQDigital Standard IS-95 CDMAMODE
Page 187 and 188:
SMIQDigital Standard IS-95 CDMAREV
Page 189 and 190:
SMIQDigital Standard IS-95 CDMA(TRI
Page 191 and 192:
SMIQDigital Standard IS-95 CDMA(CLO
Page 193 and 194:
SMIQDigital Standard IS-95 CDMA(SAV
Page 195 and 196:
SMIQDigital Standard IS-95 CDMADATA
Page 197 and 198:
SMIQDigital Standard IS-95 CDMACHAN
Page 199 and 200:
SMIQ Digital Standard W-CDMA (NTT D
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
SMIQDigital Standard 3GPP W-CDMA (F
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
Page 245 and 246:
Page 247 and 248:
Page 249 and 250: SMIQDigital Standard 3GPP W-CDMA (F
Page 285 and 286: SMIQEnhanced Functions For Digital
Page 299: SMIQEnhanced Functions For Digital
Page 311 and 312: SMIQDigital Standard NADC2.16.1 Syn
Page 313 and 314: SMIQDigital Standard NADC2.16.3 Lis
Page 315 and 316: SMIQDigital Standard NADC(MODULATIO
Page 317 and 318: SMIQDigital Standard NADC(TRIGGER..
Page 319 and 320: SMIQDigital Standard NADC(POWER RAM
Page 321 and 322: SMIQDigital Standard NADCRATECONFIG
Page 323 and 324: SMIQDigital Standard NADC(SELECT SL
Page 325 and 326: SMIQDigital Standard NADC(SELECT SL
Page 327 and 328: SMIQDigital Standard PDC2.17 Digita
Page 329 and 330: SMIQDigital Standard PDC2.17.2 PN G
Page 331 and 332: SMIQDigital Standard PDC2.17.5 Menu
Page 333 and 334: SMIQDigital Standard PDCEXECUTETRIG
Page 335 and 336: SMIQDigital Standard PDC(CLOCK...)
Page 337 and 338: SMIQDigital Standard PDCFREQPHS100.
Page 339 and 340: SMIQDigital Standard PDC(SELECT SLO
Page 349 and 350: SMIQDigital Standard GSM/EDGE2.18 D
Page 351 and 352:
SMIQDigital Standard GSM/EDGE2.18.2
Page 353 and 354:
SMIQDigital Standard GSM/EDGE2.18.5
Page 355 and 356:
SMIQDigital Standard GSM/EDGEEXECUT
Page 357 and 358:
SMIQDigital Standard GSM/EDGEFig. 2
Page 359 and 360:
SMIQDigital Standard GSM/EDGE(SAVE/
Page 361 and 362:
SMIQDigital Standard GSM/EDGE(SELEC
Page 363 and 364:
SMIQDigital Standard GSM/EDGEMenu s
Page 365 and 366:
SMIQDigital Standard GSM/EDGE(SELEC
Page 367 and 368:
SMIQDigital Standard DECT2.19.1 Syn
Page 369 and 370:
SMIQDigital Standard DECT2.19.3 Lis
Page 371 and 372:
SMIQDigital Standard DECT(MODULATIO
Page 373 and 374:
SMIQDigital Standard DECT(TRIGGER..
Page 375 and 376:
SMIQDigital Standard DECTPOWER RAMP
Page 377 and 378:
SMIQDigital Standard DECT(SAVE/RCL
Page 379 and 380:
SMIQDigital Standard DECT(SELECT SL
Page 381 and 382:
SMIQDigital Standard DECT(SELECT SL
Page 383 and 384:
SMIQDigital Standard GPSFor more de
Page 385 and 386:
SMIQDigital Standard GPSTRIGGER...E
Page 387 and 388:
SMIQDigital Standard GPSPATTERNDATA
Page 389 and 390:
SMIQArbitrary Waveform Generator AR
Page 391 and 392:
Page 393 and 394:
Page 395 and 396:
Page 397 and 398:
Page 399 and 400:
Page 401 and 402:
Page 403 and 404:
Page 405 and 406:
SMIQExternal Modulation Source AMIQ
Page 407 and 408:
Page 409 and 410:
Page 411 and 412:
Page 413 and 414:
Page 415 and 416:
Page 417 and 418:
SMIQBit Error Rate Test2.23.1 Bit E
Page 419 and 420:
SMIQBit Error Rate TestPRBSDATA POL
Page 421 and 422:
SMIQBit Error Rate Test2.23.1.2 Sig
Page 423 and 424:
SMIQBit Error Rate TestBER measurem
Page 425 and 426:
SMIQBit Error Rate TestPossible Pro
Page 427 and 428:
SMIQBit Error Rate TestSTATEMODEEXE
Page 429 and 430:
SMIQBit Error Rate Testreliable BLE
Page 431 and 432:
SMIQNoise Generator and Distortion
Page 433 and 434:
Page 435 and 436:
Page 437 and 438:
Page 439 and 440:
SMIQLF Output2.25 LF OutputThe inte
Page 441 and 442:
SMIQSweep2.26.2 Selecting the Sweep
Page 443 and 444:
SMIQSweepMARKERThis output becomes
Page 445 and 446:
SMIQSweepSTEP LIN (LOG)DWELLInput v
Page 447 and 448:
SMIQSweepRESET SWEEPSets the starti
Page 449 and 450:
SMIQLIST Mode2.27 LIST ModeA sequen
Page 451 and 452:
SMIQLIST ModeMARKER At the first st
Page 453 and 454:
SMIQLIST ModeThe second page of the
Page 455 and 456:
SMIQMemory SequenceOperating Modes
Page 457 and 458:
SMIQMemory SequenceThe second page
Page 459 and 460:
SMIQUtilities2.29.2 Parameter of th
Page 461 and 462:
SMIQUtilities2.29.4 Suppressing Ind
Page 463 and 464:
SMIQUtilitiesEXT FREQUENCYInput val
Page 465 and 466:
SMIQUtilities2.29.9 Calibration (CA
Page 467 and 468:
SMIQUtilitiesCalibration VECTOR MOD
Page 469 and 470:
SMIQUtilitiesCalibration ALC TABLEF
Page 471 and 472:
SMIQUtilitiesCalibration LFGENCalib
Page 473 and 474:
SMIQUtilities2.29.11 Voltage Indica
Page 475 and 476:
SMIQUtilities2.29.13 Indications of
Page 477 and 478:
SMIQUtilities2.29.16 Setting Auxili
Page 479 and 480:
SMIQUtilities2.29.18 Installation o
Page 481:
SMIQError Messages2.32 Error Messag
Page 484 and 485:
IndexSMIQvalue range ..............
Page 486 and 487:
IndexSMIQDisplaybrightness.........
Page 488 and 489:
IndexSMIQBIT CLOCK ................
Page 490 and 491:
IndexSMIQadditional................
Page 492 and 493:
IndexSMIQQAM modulation............
Page 494 and 495:
IndexSMIQbroadband AM..............
show all

Operating Manual Vol 1 - ES Documentation

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?