Operating Manual Vol 1 - ES Documentation

SMIQUtilities2.29.4 Suppressing Indications and Deleting Memories (SYSTEM-SECURITY)For security interests, indications can be suppressed and memories deleted in the SYSTEM-SECURITYsubmenu.Menu selection:UTILITIES - SYSTEM-SECURITYFREQ100. 000 000 0 MHz LEVEL-30.0 dBmFREQUENCYLEVELANALOG MODVECTOR MODDIGITAL MODDIGITAL STDLF OUTPUTSWEEPLISTMEM SEQUTILITIESSYSTEMREF OSCPHASEPROTECTCALIBDIAGTESTMOD KEYAUX I/OBEEPERINSTALLGPIBRS232SERDATASECURITYLANGUAGESTATE OFF ONANNOTTATION FREQ OFF ONANNOTTATION AMPLITUDE OFF ONCLEAR MEMORYFig. 2-257Menu UTILITIES - SYSTEM-SECURITYSTATESelection of the SECURITY stateON Locks the suppression of the indications. Can only beset via IEC bus.OFF Deactivates the interlock of the indicationsuppression. The preset state is set in the transitionON→OFF, and all data stored such as settings, withthe exception of the DM lists are deleted. Can onlybe set via IEC bus.IEC/IEEE-bus command :SYST:SEC OFFANNOTATION FREQ OFF All frequency indications are suppressed.ON The frequency setting is displayed..IEC/IEEE-bus command :DISP:ANN:FREQ ONANNOTATION AMPLITUDE OFF All level indications are suppressed.ON The level setting is displayed.IEC/IEEE-bus command :DISP:ANN:AMPL ONCLEAR MEMORYDeletion of all data stored such as settings, user correction andlist settings stored, with the exception of the DM lists.For this action, two commands are necessary at the IEC bus:IEC/IEEE-bus command :SYST:SEC ON; SEC OFF1125.5555.03 2.413 E-9