Operating Manual Vol 1 - ES Documentation

External Modulation Source AMIQSMIQ(SETUP...) OFFSET I VAR Fine adjustment of level offset for the I channel incase of variable level. The offset detuning dependson the of the mechanical attenuator setting of AMIQ.See AMIQ manual, section SOURce - HardwareSettings.LEVEL Q GAIN Fine adjustment of gain factor for the Q channel incase of fixed level.OFFSET Q FIX Fine adjustment of level offset for the Q channel incase of fixed level.OFFSET Q VAR Fine adjustment of level offset for the Q channel incase of variable level.SKEW (Q-I) Defining the delay between the I and Q channel.Positive values delay I compared with Q. The delaycan be modified by entering the relative factors ±1.0in a range of approx. ±1 ns at a resolution of 10 ps.SELF TESTTriggers the internal AMIQ selftest which comprisesthe following:− memory test of the output memory.− control of components of analog hardware andcheck of signal paths by means of the built-indiagnostic A/D converter.SAVE/RECALLSETTINGS...Opens a window to save/load/delete a maximum number of 100 AMIQ setups.FREQ 100. 000 000 0 MHz LEVEL - 30.0 dBmFREQUENCYLEVELANALOG MODVECTOR MODDIGITAL MODDIGITAL STDAMIQ CTRLLF OUTPUTSWEEPLISTMEM SEQSETUP... RECALL SETTING...SAVE/RECALL SAVE SETTING...DELETE SETTING...SELECT WAVEMODEEXECUTE SINEXT TRIG SLFILTERLEVEL...MARKER...REFERENCE OFig. 2-229Menu AMIQ CTRL -SAVE/RECALL SETTINGS...(SAVE/RECALLSETTINGS...)RECALL SETTING... Selects and loads a stored AMIQ setup. Theavailable setups are offered in a select window.1125.5555.03 2.360 E-9