Operating Manual Vol 1 - ES Documentation

Digital Standard 3GPP W-CDMA (FDD)SMIQChannel table of the DPDCHs:SYMBOL RATECHANNELIZATIONCODEDATAThe symbol rate of the DPDCH is displayed. This parameter cannot bechanged. Its value depends on the overall symbol rate.IEC/IEEE-bus command :SOUR:W3GP:MST1:DPDC2:SRAT?The channelization code of the DPDCH is displayed. This parameter cannotbe changed. Its value depends on the overall symbol rate.IEC/IEEE-bus command :SOUR:W3GP:MST1:DPDC2:CCOD?Selection of the data source for the DATA field. Selection from PN9, PN11,PN15, PN16, ALL0, ALL1 and PATTern. The PN generator function isexplained in section 2.12.3, for example.If PATTern data type is used, the pattern can be modified with a special editor.The length is limited to 24 digits.IEC/IEEE-bus :SOUR:W3GP:MST3:DPDC3:DATA PN15:SOUR:W3GP:MST3:DPDC3:DATA:PATT #H1234, 152.14.2.7 WCDMA/3GPP – Multi Channel Edit MenuWhen MULTI CHANNEL EDIT is selected, a submenu in which several DPCHs can be configured isopened. This menu item is only available for base stations.Fig. 2-124DIGITAL STD – WCDMA/3GPP – BS CONFIGURATION / MULTI CHANNEL EDIT menuIn this submenu, all parameters in the channel table can be set for a group of DPCHs. The parameterranges are identical to those in the channel table.MULTI CHANNELEDIT...START CH NO (DPCH)/STOP CH NO (DPCH)Range of DPCHs that are to be commonly configured.Range 11 to 138.IEC/IEEE-bus command::SOUR:W3GP:MCH:STAR 14IEC/IEEE-bus command::SOUR:W3GP:MCH:STOP 54SYMBOL RATESymbol rate of DPCHs:7.5 ksps, 15 ksps, 30 ksps, 60 ksps, 120 ksps,240 ksps, 480 ksps or 960 kspsIEC/IEEE-bus command::SOUR:W3GP:MCH:SRAT D64K1125.5555.03 2.208E-9