Operating Manual Vol 1 - ES Documentation

SMIQ Digital Standard W-CDMA (NTT DoCoMo/ARIB 0.0)2.13.5 Menu W-CDMA Standard - Uplink Signals with IQ MultiplexThe settings for generating W-CDMA signals can be accessed via the menu DIGITAL STD - W-CDMA.The figure below shows the menu for generating the uplink signal with multiplex mode for the I and Qchannel in the 8CHAN mode. The previous section shows the menu for generating the up and downlinksignals without IQ multiplex as well as the parameters which are identical for all modes.Selection: DIGITAL STD - WCDMA- MODE -8CHAN, -LINK DIRECTION/MULTIPLEX - UP_IQ_MULTFREQWCDMA100. 000 000 0 MHzLEVEL -30.0 dBmPEP - 14.9dBmFREQUENCYLEVELANALOG MODVECTOR MODDIGITAL MODDIGITAL STDLF OUTPUTSWEEPLISTMEM SEQUTILITIESPHSIS-95WCDMANADCPDCGSMDECTSTATEOFF ONMODE 4CHAN 8CHAN 15CHANSET DEFAULTCHIP RATE 4.096 McpsLINK DIRECTION/MULTIPLEXUP_IQ_MULTMODULATION...QPSKTRIGGER MODE... RETRIGEXECUTE TRIGGERTRIGGER....INTCLOCK... INT EXTTOTAL POWER0.0 dBADJUST TOTAL POWERSAVE/RECALL SETTINGS...COMING SOONMULTICODE...OFFSEQUENCE LENGTH (FRAMES) 1_________SYMB RATE SPREAD POWER_______________CHNO TYPE [ks/s] CODE [dB] DATA STATE0I DPDCH 16 1 -11.8 PN15 OFF0Q DPCCH 16 0 -11.8 PN15 ON1I DPDCH 16 8 -11.8 PN15 ON1Q DPDCH 16 8 -11.8 PN15 ON2I DPDCH 16 9 -11.8 PN15 ON2Q DPDCH 16 9 -11.8 PN15 ON3I DPDCH 16 10 -11.8 PN15 ON3Q DPDCH 16 10 -11.8 PN15 ON4I DPDCH 16 11 -11.8 PN15 ON4Q DPDCH 16 11 -11.8 PN15 ON...7I DPDCH 16 14 -11.8 PN15 ON7Q DPDCH 16 14 -11.8 PN15 ONFig. 2-96 Menu DIGITAL STD - WCDMA - MODE - 8CHAN, -LINK DIRECTION/MULTIPLEX -UP_IQ_MULT, equipped with options modulation coder SMIQB20, data generatorSMIQB11 and SMIQB43Parameters STATE to SEQUENCE LENGTHsee section " Menu W-CDMA Standard -Downlink andUplink Signals without IQ Multiplex"1125.5555.03 2.165E-9