Operating Manual Vol 1 - ES Documentation

SMIQDigital Standard GSM/EDGEMenu selection:BURST TYPE = ALL_DATAFig. 2-203Menu DIGITAL STD - GSM/EDGE - SELECT SLOT – ALL_DATA, SMIQ equipped withModulation Coder SMIQB20 and Data Generator SMIQB11(SELECT SLOT...)ALL_DATABURST TYPESLOT LEVELDATAGUARDOpens a window for the selection of burst type used toconfigure the selected slot.ALL_DATA Burst type for testing with freely programmabledata contents.IEC/IEEE :SOUR:GSM:SLOT2:TYPE ADATSelection of level for selected slot.OFF Maximum attenuationIEC/IEEE :SOUR:GSM:SLOT2:LEV OFFFULL The level corresponds to the value indicated onthe SMIQ LEVEL display.IEC/IEEE :SOUR:GSM:SLOT2:LEV FULLATTEN The level is reduced by the value set underSLOT ATTENUATION.IEC/IEEE :SOUR:GSM:SLOT2:LEV ATTSelection of data source for DATA fields. These fields areregarded as a continuous field, i.e. a pseudo-randomsequence is fully continued from one DATA field to the next.The following data sources are available:PN.. PRBS data according to CCITT with periodsbetween 2 9 -1 and 2 23 -1.IEC/IEEE :SOUR:GSM:SLOT3:DATA PN15DLIST Data from a programmable data list.IEC/IEEE :SOUR:GSM:SLOT3:DATA DLISSERDATA Data from data input SER DATA.IEC/IEEE :SOUR:GSM:SLOT3:DATA SDATDisplay of data content in the Guard field in binary form. Thelength of the field is 8 bit in slots 1,2,3,5,6,7 and 9 bit in slots0 and 4. It is thus ensured that a frame exactly has 1250 bitas stipulated in the GSM standard.Parameter SELECT DATA LIST... to EDIT DATA LIST...see menu selection BURST TYPE = NORM1125.5555.03 2.315E-9