Operating Manual Vol 1 - ES Documentation

UtilitiesSMIQ2.29.15 Assigning Modulations to the [MOD ON/OFF] Key (MOD-KEY)The modulations can be switched on/off in the individual modulation menus and parallely by means ofthe [MOD ON/OFF] key.For which modulations the [MOD ON/OFF] key is effective can be defined in the UTILITIES-MOD KEYmenu. The key can either be effective for all modulations or for a selected one.Function of the [MOD ON/OFF] key if effective for a type of modulation: Every pressing a key alters the state (ON or OFF) of the selected modulation.Function of the [MOD ON/OFF] key if effective for all types of modulation (ALL): If at least one modulation is switched on, pressing the [MOD ON/OFF] key switches the modulation/soff. Which modulations were switched on is stored.If no modulation is switched on, pressing the [MOD ON/OFF] key switches on the modulations whichwere last switched off using the [MOD ON/OFF] key.On switching on using the [MOD ON/OFF] key, the modulation sources are used as defined in themodulation menus.Access to the selection of the modulation to be switched using the [MOD ON/OFF] key is possible in theUTILITIES-MOD KEY menu.Menu selection:UTILITIES - MOD KEYFREQ100. 000 000 0 MHz LEVEL -30.0 dBmFREQUENCYLEVELANALOG MODVECTOR MODDIGITAL MODDIGITAL STDLF OUTPUTSWEEPLISTMEM SEQUTILITIESSYSTEMREF OSCPHASEPROTECTCALIBDIAGTESTMOD KEYAUX I/OBEEPERINSTALLMODULATION...ALLFig. 2-272Menu UTILITIES - MOD KEY (preset setting)MODULATIONOpen a window for selection of the modulation for which the [MOD ON/OFF]key is to be effective. The following is to choose from:ALL, AM, BB-AM, FM, PM, PULSE, DM, VM, FSIM, DISTO, NOISE.Note:Preset switches off all modulations, sets the selection to ALL andstores AM 30%, AM SOURCE INT as default setting.1125.5555.03 2.428E-9