Operating Manual Vol 1 - ES Documentation

SMIQDigital Standard DECT(TRIGGER...)EXT TRIGGERDELAYEXT RETRIGGERINHIBITTRIGGER OUT2DELAYTRIGGER OUT2PERIODSetting the number of symbols by which an externaltrigger signal is delayed before it starts the DECTsignal generation.This is used for setting the time synchronizationbetween the SMIQ and the DUT.IEC/IEEE-bus :SOUR:DECT:TRIG:DEL 3Setting the number of symbols for which a restart isinhibited after a trigger event.With TRIGGER MODE RETRIG selected, each newtrigger signal restarts the DECT signal generation.This restart can be inhibited for the entered numberof symbols.Example:The entry of 1000 symbols causes new triggersignals to be ignored for the duration of 1000 symbolsafter a trigger eventIEC/IEEE-bus :SOUR:DECT:TRIG:INH 1000Input value of delay of trigger signal at TRIGOUT 2output compared with beginning of frame.IEC/IEEE-bus :SOUR:DECT:TRIG:OUTP:DEL 2Input value of output signal period at TRIGOUT 2output given in frames.IEC/IEEE-bus :SOUR:DECT:TRIG:OUTP:PER 11125.5555.03 2.325 E-9