Operating Manual Vol 1 - ES Documentation

SMIQFitting the OptionsX606 X605 X604 X603 X607NDSIMX600X602X601Fig. 1-3Module NDSIMConnector X607 is unused and provided only in some modules.Calibrating theNDSIM andthe I/Q Modulator½ The included adhesive label ’Option included’ is to be fixed at therear panel of the SMIQ.½ Warm-up the instrument for 1 hours.½ Call up menu UTILITIES - CALIB - VECTOR MOD.1.3.10 Option SMIQB20 - Modulation CoderThe Modulation Coder is fitted at the slot with label "MCOD".½ Plug the module into the appropriate place, lock it and fasten allscrews.½ Open the air inlets at the housing frame by breaking out the safetyglass plate which belongs to the option½ Depending on the fact whether the option SMIQB14 (FSIM1) hasbeen installed in the SMIQ, the following coaxial connections haveto be made (cf. Fig. 1-4):Note: Please store the remaining cables. They will be required iffurther options will be installed at a later stage or options willbe removed.SMIQ without option FSIM 1 SMIQ with option FSIM 1 Remark about cableCablefromMCODtotoW322 X321 REFSS X72 REFSS X72 W322 was provided with MCOD.W72 X322 DSYN X81 DSYN X81 Withdraw W72 from X72 of module REFSS.W243 X323 BACK POW RAMPsocketBACKPOW RAMPsocketWithdraw W243 from X243 of module IQMOD.W324 X324 IQMOD X243 IQMOD X243 W324 was provided with MCOD.W325 X325 IQMOD X244 - W325 was provided with MCOD.W361 X325 - FSIM 1 X361 W361 was provided with FSIM1.X326 - - - -W244 X327 FRO I socket FRO I socket Withdraw W244 from X244 of module IQMOD. IfFSIM1 is installed withdraw W244 from X361 ofmodule FSIM1.W328 X328 IQMOD X245 - W328 was provided with MCOD.W363 X328 - FSIM 1 X363 W363 was provided with FSIM1.X329 - - - -W245 X330 FRO Q socket FRO Q socket Withdraw W245 from X245 of module IQMOD. IfFSIM1 is installed withdraw W245 from X363 ofmodule FSIM1.1125.5555.03 1.13E-7