Operating Manual Vol 1 - ES Documentation

SMIQArbitrary Waveform Generator ARB2.21.2.2 ARB MOD - SELECT WAVEFORM MenuFig. 2-220ARB MOD - SELECT WAVEFORM... menuSELECT WAVEFORM...Opens a window for selection of an ARB waveform and for display of itsparameters.WAVEFORMA list of ARB waveforms is offered to the right. The length of thewaveforms is indicated in samples. The user selects a waveformfrom this list, which then becomes the active waveform. Furtherinformation on this waveform is then provided.IEC/IEEE bus command :ARB:WAV:SEL ‘TEST’Fig. 2-221ARB MOD - WAVEFORM INFO menuSELECT WAVEFORM... ----Waveform Info --------These lines are for display purposes only, they cannot be modified. They arefilled with values from the active waveform when opening the menu. After beingconfirmed by the user they are updated via (SELECT). Setting parameters arenot set until this confirmation and errors are signaled with conflicts, when themenu is left via RETURN (see SET SMIQ ACCORDING TO WAVEFORMmenu). IEC/IEEE bus commands have the form of queries.1125.5555.03 2.349 E-9