Operating Manual Vol 1 - ES Documentation

SMIQFront Panel2.1.2 Controls and Inputs/Outputs of the Front Panel(cf. Fig. 2-1, front panel view)2 DATA INPUTParameter fieldFREQLEVELSAVERCLParameters RF frequency and RF level can be entereddirectly by means of the parameter keys, alternativelyto menu operation. The input value (indicated in theheader field) considers the offset, see Sections 2.4 and2.5. Further, complete instrument settings can bestored and called.FREQ Opens the setting of the RF frequency viavalue input or variation by means of a rotaryknob. The current menu is maintained.Return to the menu by means of the[RETURN] key. (Setting of the RF frequencyalso in the FREQUENCY menu).LEVEL Opens the setting of the RF level via valueinput or variation by means of a rotary knob.The current menu is maintained. Return tothe menu by means of the [RETURN] key.(Setting of the RF level also in the LEVELmenu).SAVE Opens the storing of the current instrumentsetting. Memory selection is effected byentering a number (1 to 50) and is finished bymeans of the [ENTER] key.RCL Opens the calling of an instrument settingstored. Memory selection is effected byentering a number (1 to 50) and is finished bymeans of the [ENTER] key.see as wellChapter 2Section"Use of [FREQ] and[LEVEL] Keys"Section"RF Frequency"Section"RF Level"Section"Storing and Calling ofInstrument Settings"Numeric input field7418 95 62 3Numeric values, decimal point and minus sign can beentered by means of the digital keys.,0...9 Enters the digit.Enters the decimal pointsee as wellChapter 2Section"Basic OperatingSteps"0.--/←Enters the minus sign.Deletes the last input (digit, sign or decimalpoint) - key [BACKSPACE].1125.5555.03 2.3 E-7