Operating Manual Vol 1 - ES Documentation

Digital Standard W-CDMA (NTT DoCoMo/ARIB 0.0)SMIQDATA...Opens a window for selecting data sources and setting a data offset. The firstline of the window indicates the code channel for which the settings are done(DATA CONFIGURATION OF CHANNEL NO).DATASelection of the data source for the DATA field of theselected channel type. The data from the selecteddata source are permanently continued from slot toslot in the data field.PN..PRBS data to CCITT with period lengthsbetween 29-1 and 216-1.DLIST Data from a list previously programmedand stored. Programming is performed inthe menuDIGITAL MOD - SOURCE - EDIT DATA LISTIEC/IEEE-bus :SOUR:WCDM:CHAN4:DATA PN9DATA OFFSETTPCEntry value for a data offset in units of symbolduration. The admissible range is as large as thelength of a radio frame. The entry of a data offsetshifts in time the modulation data with respect to thespread code.IEC/IEEE-bus :SOUR:WCDM:CHAN4:DATA:OFFS 3Selection of the data source for the TPC field inchannel types DPCH and DPCCh.0 0 data are continuously generated1 1 data are continuously generatedALTThe TPC field is alternately assigned with1 or 0 from slot to slot.(The first slot contains 1 data).DLIST Data from a list previously programmedand stored. Programming is performed inthe menu DIGITAL MOD - SOURCE -EDIT DATA LISTIEC/IEEE-bus :SOUR:WCDM:CHAN4:TPC ZEROSTATESwitch on/off of assigned code channel.IEC/IEEE-bus command :SOUR:WCDM:CHAN4:STAT ON1125.5555.03 2.164E-9