Operating Manual Vol 1 - ES Documentation

Arbitrary Waveform Generator ARBSMIQTRIGGER...SELECT WAVEFORM...DELETE WAVEFORM...SET SMIQ ACCORDING TOWAVEFORM...CLOCK FREQUENCYOpens a window for setting the trigger facilities and the trigger outputs.Opens a window for selection of an ARB waveform and for display of itsparameters.Opens a window for selection of an ARB waveform to be deleted.Opens a window for configuration of the automatic setting of SMIQparameters.Input value for the sample clock. If the clock is supplied by an externalsource, the applied frequency must be entered here.IEC/IEEE bus command :ARB:CLOC 4.096MHzCLOCK...IQ OUTPUT...CCDF CCDF TRACESOpens a window for selection of the clock source and delay of the clocksignal.Opens a window for entry of the IQ level and mode.Display of the Complementary Cumulative Distribution Function of thewaveform loaded.Entry of the number of CCDFs. 1 to 3 may be selected.DELETE ALL WAVEFORMS All waveforms are deleted (after being confirmed by the user).1125.5555.03 2.346E-9