Operating Manual Vol 1 - ES Documentation

Enhanced Functions For Digital Standard 3GPP W-CDMA (FDD)SMIQ----------------------Specific Enhanced Channel Settings--------------------------------------------------CHANNEL NUMBERSTATEDisplay parameter for the assigned serial number of a downlink enhancedDPCH or an uplink enhanced DPDCH from the BS1 or MS1 channel table.The enhanced channels are assigned to the first 4 dedicated channels in theBS1 channel table or to the DPCCH/DPDCH of the MS1 channel table.With Enhanced P-CCPCH/BCH State On in the downlink, also the P-CCPCHwith channel number 4 is available.Switch for activating or deactivating the corresponding downlink enhancedchannel. In the ON state the channel is marked as enhanced channel by anadditional E (in addition to CH. NO) in the channel table line determined by theCHANNEL NUMBER in the higher BS1 menu – under the precondition that theENHANCED CHANNELS STATE switch is set to ON.In the OFF state, the following channel-specific menu parameters are noteffective:CHAN CODEPOWER STARTPOWER CONTROLDATATPCMULTI CODEIn the higher BS1 menu, the STATE parameter has to be updated in thechannel table line determined by the ENHANCED CHANNEL NUMBER.Note: The enhanced channels cannot be activated individually in theuplink; the required enhanced channels are automatically activatedvia the OVERALL SYMBOL RATE setting.IEC/IEEE-bus command :SOUR:W3GP:BST:ENH:CHAN11:STAT ONTYPEDisplay parameter for the channel type of the corresponding enhancedchannel.The type is taken from the TYPE parameter of the channel table line orcolumn determined by the ENHANCED CHANNEL NUMBER with the channeltable belonging to the higher BS1/MS1 menu.In the downlink, enhanced channels have the DPCH type and in the uplink, theDPCCH type (1st enhanced channel) or DPDCH (2nd to 4th enhancedchannel).With Enhanced P-CCPCH/BCH State On in the downlink, channel typeP-CCPCH is additionally available in the table.1125.5555.03 2.250 E-9