Operating Manual Vol 1 - ES Documentation

Digital Standard DECTSMIQEXECUTETRIGGERTRIGGER...Executes a trigger even to start the DECT signal generation. This menu itemis not available if TRIGGER MODE - AUTO is set.IEC/IEEE-bus command :TRIG:DM:IMMOpens a window for selecting the trigger source, for configuring the triggeroutput signals and for setting the time delay of an external trigger signal.FREQDECT100. 000 000 0 MHzLEVEL -30.0 dBmPEP - 30.0 dBmFREQUENCYLEVELANALOG MODVECTOR MODDIGITAL MODDIGITAL STDLF OUTPUTSWEEPLISTMEM SEQUTILITIESPHSIS-95NADCPDCGSMDECTSTATETRIGGER SOURCE INT EXTMODULATION... EXT TRIGGER DELAY0 SymbTRIGGER MODE EXT RETRIGGER INHIBIT0 SymbEXECUTE TRIGTRIGGER.... TRIGGER OUT2 DELAY0 SymbCLOCK...POWER RAMP C>SLOT ATTENUATRIGGER OUT2 PERIOD1 Frame0 1FULLFig. 2-207Menu DIGITAL STD - DECT_TRIGGER..., SMIQ equipped with Modulation CoderSMIQB20 and Data Generator SMIQB11(TRIGGER...) TRIGGER SOURCE Selection of trigger source.EXT The DECT signal generation is startedby the active slope of an external triggersignal.The polarity, the trigger threshold andthe input resistance of the TRIGIN inputcan be modified in menu DIGITAL MOD- EXT INPUTS.INT A trigger event can be executed byEXECUTE TRIGGER .IEC/IEEE-bus :SOUR:DECT:TRIG:SOUR EXT1125.5555.03 2.324E-9