Operating Manual Vol 1 - ES Documentation

Digital Standard W-CDMA (NTT DoCoMo/ARIB 0.0)SMIQTYPESYMBOL RATEOpens a window for selecting the channel type.PERCH Perch 1-channel with Pilot, DATA and LMS data field. Selection ispossible with LINK DIRECTION - DOWN.CCPCH Common Control Physical Channel with Pilot and DATA field.Selection is possible with LINK DIRECTION - DOWN and UP.DPCH Dedicated Control Physical Channel with Pilot, TPC and DATAfield. Selection is possible with LINK DIRECTION - DOWN and UP.ALLD All data channel type only with DATA field. Selection is possiblewith LINK DIRECTION - DOWN and UP.IEC/IEEE-bus command :SOUR:WCDM:CHAN4:DPCHOpens a window for selecting the symbol rate. The admissible selectiondepends on the channel type selected (TYPE). The possible values arerepresented in the following table:TYPESYMBOL RATEkS/sPERCH 16CCPCH 64DPCH 32, 64, 128, 256, 512, 1024DPDCH 16, 32, 64, 128, 256, 512, 1024DPCCH 16ALLD 16, 32, 64, 128, 256, 512, 1024IEC/IEEE-bus command:SOUR:WCDM:CHAN4:SRAT D64Menu selection:DIGITAL STD - WCDMA - SPREAD CODEFREQWCDMA100. 000 000 0 MHzLEVEL -30.0 dBmPEP - 14.9 dBmFREQUENCYLEVELANALOG MODVECTOR MODDIGITAL MODDIGITAL STDLF OUTPUTSWEEPLISTMEM SEQUTILITIESPHSIS-95WCDMANADCPDCGSMDECTCLOCKTOTALADJUST TOTALSAVE/RECALLMULTICODE..SEQUENCE LE___________CHNO TYPE0 PERCH1 DPCH2 DPCHSPREADING OF CHANNEL 1SHORT CODE 10LONG CODE INIT 00001 HLONG CODE OFFSET0 ChipFig. 2-94Menu DIGITAL STD - WCDMA - SPREAD CODE; equipped with options modulation coderSMIQB20, data generator SMIQB11 and SMIQB43SPREAD CODEOpens a window for the spread code settings. The first line of the windowindicates the code channel for which the settings are done (SPREADING OFCHANNEL NO).1125.5555.03 2.162E-9