Operating Manual Vol 1 - ES Documentation

Digital Standard W-CDMA (NTT DoCoMo/ARIB 0.0)SMIQ2.13.3 Lists as an Internal Data SourceA freely programmable memory can be used as a data source for DATA or TPC fields. The data aremanaged in lists. A list editor enables the data lists (DATA LIST) to be selected, copied, modified anderased. The list editor can be accessed via the menu DIGITAL MOD SOURCE...2.13.4 Menu W-CDMA Standard - Downlink and Uplink Signals without IQMultiplexMenu DIGITAL STD - W-CDMA provides access to settings for W-CDMA signal generation.The figure below shows an example of the menu for generating the downlink signal (transmit signal ofthe base station) in the 8CHAN mode. The menus for generating uplink signals without IQ multiplexhave nearly the same structure. A menu for generating uplink signals with IQ multiplex is shown in thenext section. Parameters that are identical for all modes are explained in this section.Menu selection:DIGITAL STD - WCDMA - MODE - 8CHAN, -LINK DIRECTION/MULTIPLEX DOWNFREQWCDMA100. 000 000 0 MHzLEVEL -30.0 dBmPEP - 14.9dBmFREQUENCYLEVELANALOG MODVECTOR MODDIGITAL MODDIGITAL STDLF OUTPUTSWEEPLISTMEM SEQUTILITIESPHSIS-95WCDMANADCPDCGSMDECTSTATEOFF ONMODE 4CHAN 8CHAN 15CHANSET DEFAULTCHIP RATE 4.096 McpsLINK DIRECTION/MULTIPLEXDOWNMODULATION...QPSKTRIGGER MODE... RETRIGEXECUTE TRIGGERTRIGGER....INTCLOCK... INT EXTTOTAL POWER0.0 dBADJUST TOTAL POWERSAVE/RECALL SETTINGS...COMING SOONMULTICODE...OFFSEQUENCE LENGTH (FRAMES) 1_________SYMB RATE SPREAD POWER_______________CHNO TYPE [ks/s] CODE [dB] DATA STATE0 PERCH 16 0 -9.0 PN15 ON1 DPCH 32 10 -9.0 PN15 ON2 DPCH 32 11 -9.0 PN15 ON3 DPCH 32 12 -9.0 PN15 ON4 DPCH 32 13 -9.0 PN15 ON5 DPCH 32 14 -9.0 PN15 ON6 DPCH 32 15 -9.0 PN15 ON7 DPCH 32 16 -9.0 PN15 ONFig. 2-90Menu DIGITAL STD - WCDMA - MODE - 8CHAN, LINK DIRECTION/MULTIPLEX - DOWN,equipped with options modulation coder SMIQB20, data generator SMIQB11 and SMIQB431125.5555.03 2.154E-9