Operating Manual Vol 1 - ES Documentation

Digital Standard PHSSMIQ(SELECT SLOT) R Display of data contents in the 4-bit data field "Ramp".SSPRUWCISATCH / VOXDisplay of data contents in the 2-bit data field"Start Symbol".Display of "Preamble".Input value for the "Unique Word" in hexadecimal form.The length of the hexadecimal value depends on the slottype (16 | 32 bit).IEC/IEEE-bus :SOUR:PHS:SLOT2:UWOR #H3D4CDisplay of the "Channel Identifier" data field in hexadecimalform.Selection of data source for SACCH. This data field isonly displayed for burst types TCH and VOX.PN.. PRBS data according to CCITT V52 or Rec.0.151 with periods between 2 9 -1 and 2 23 -1.IEEE :SOUR:PHS:SLOT3:SACCH PN9DLIST Data from a programmable data list.IEEE :SOUR:PHS:SLOT3:SACCH DLISSERDATA Data from data input SER DATAIEEE :SOUR:PHS:SLOT3:SACCH SDATSelection of data source for TCH data field. This datafield is only displayed for burst types TCH and VOX.PN..DLISTSERDATAPRBS data according to CCITT V52 or Rec.0.151 with periods between 2 9 -1 and 2 23 -1.IEEE :SOUR:PHS:SLOT3:TCH PN9Data from a programmable data list.IEEE :SOUR:PHS:SLOT3:TCH DLISData from data input SER DATAIEEE :SOUR:PHS:SLOT3:TCH SDATCS-IDInput value for the "Cell Station ID Code" field in hexadecimalform. This data field is only displayed for theburst type SYNC.IEEE-bus :SOUR:PHS:SLOT2:CSID #H202000200011125.5555.03 2.128E-9