Operating Manual Vol 1 - ES Documentation

The Help SystemSMIQ2.30 The Help SystemThe SMIQ has two help systems. On the one hand the context-sensitive help which is called by meansof the HELP key and which gives information on the current menu. On the other hand, auxiliary textscan be selected according to headwords in alphabetical order by accessing menu HELP.HELP KeyThe yellow HELP key can be pressed at any point in time. The current setting menu is faded out andcontext-sensitive text faded in. The help panel can be exited by means of the RETURN key.Menu HELPAfter calling the help menu, access to all auxiliary texts is possible via an index. Operation is analog tomenu operation. Set the menu cursor to the index desired using the shaft encoder. Press the [SELECT] key. The information for the index marked is displayed. Press the [RETURN] key to exit the menu.2.31 StatusBy means of a STATUS page, the SMIQ permits an overview over all settings of the instrument. Thesettings are displayed in an abbreviated form. The STATUS page is called by pressing the [STATUS]key. Return to the preceding menu is effected using the [RETURN] key.FREQ100. 000 000 0 MHzLEVEL- 30.0 dBmAMAM: INT 30.0%BB-AM: OFFLFGEN1;FM1: OFF / PM1: OFFFM2: OFF / PM2: OFFPULSE: OFFVECTOR: OFF; IMPAIR: OFFPOWER RAMP CONTROL: OFFDM:OFFLF: 1.000 0kHzLF-OUTPUT: OFFSWEEP / LIST: OFFBLANK POL: NORM; TIME: NORMREF OSC: 10MHz INTALC: ONTRIGGER SLOPE: POSALC-ONADJUST: OFFLOCALUNLOCKEDFig. 2-276Menu STATUS page1125.5555.03 2.432E-9