Operating Manual Vol 1 - ES Documentation

SMIQFront Panel2 DATA INPUTUnit keys with enter functionGnMµkmx1ENTERdBµVµVmVdB(m)The unit keys terminate the input of values and specifythe multiplication factor for the respective basic unit.The basic units are displayed next to the input fieldwhile numbers are entered. In the case of levelsettings, the unit keys specify the unit.G/n dBµV Selects giga/nano, with RF leveldBµV, with LF level dBu.M/µ µV Selects mega/micro, with level µV.k/m MV Selects kilo/milli, with level mV.1xEnter dB(m) Terminates entries in the basicunit and value inputs without unit.Selects with level dBmSelects with level offset and levelstep width dB.In order to change to another level unit, simply pressthe unit key desired. Parameter LEVEL must beactivated, e.g. by pressing the [LEVEL] key.see as wellChapter 2Section"Basic OperatingSteps"Section"Change Unit of Level"3 MENU/VARIATIONMenu keysRETURNSELECTThe menu keys access the menus and settings withinthe menus.RETURN Returns the menu cursor to thenext higher menu level.SELECT Acknowledges the choice markedby the menu cursorsee as wellChapter 2Section"Basic OperatingSteps"⇐Moves the digit cursor to the left byone position in the marked valueindication.Moves the menu cursor to the leftby one position in a 1-out-of-nselection.Moves the digit cursor to the rightby one position in the marked valueindication.Moves the menu cursor to the rightby one position in a 1-out-of-nselection.1125.5555.03 2.5 E-7