Operating Manual Vol 1 - ES Documentation

SMIQDigital Standard PDC(SELECT SLOT...)TCHSYNC2Input value for the 20 bit sync word in the first slot of asuperframe in hexadecimal form. This sync word marks thebeginning of the superframe. The input field is only displayedif SUPERFRAME is switched on. Depending on the selectedslot and the LINK DIRECTION, the following sync words arepredefined according to the PDC standard:Slot No. Downlink Sync2 Word Uplink Sync2 Word0 31BAF CE4501 1E56F E1A902 E712C 18ED33 FBC1F 043E04 8279E 7D8615 98908 676F7According to the standard, the sync words of the uplink arethe inverted sync words of the downlink.IEC/IEEE-bus :SOUR:PDC:SLOT2:SYNC #HE2A90CC Input value of the 8 bit data field " Color code ".IEC/IEEE-bus command :SOUR:PDC:SLOT2:CCOD #HFFSF Input value of the data field " Steal Flag ".IEC/IEEE-bus command :SOUR:PDC:SLOT2:SF #H0SACCHRCHSelection of data source for SACCH field (Slow AssociatedControl Channel).PN.. PRBS data according to CCITT with periodsbetween 2 9 -1 and 2 23 -1.IEC/IEEE :SOUR:PDC:SLOT3:SACC PN15DLIST Data from a programmable data list.IEC/IEEE :SOUR:PDC:SLOT3:SACC DLISSERDATA Data from data input SER DATA.IEC/IEEE :SOUR:PDC:SLOT3:SACC SDATSelection of data source for the RCH data field. RCH datareplace SACCH data in certain slots of a superframe. Theinput field is only displayed if SUPERFRAME is switched on.PN.. PRBS data according to CCITT with periodsbetween 2 9 -1 and 2 23 -1.IEC/IEEE :SOUR:PDC:SLOT3:RCH PN15DLIST Data from a programmable data list.IEC/IEEE :SOUR:PDC:SLOT3:RCH DLISSERDATA Data from data input SER DATA.IEC/IEEE :SOUR:PDC:SLOT3:RCH SDAT1125.5555.03 2.293E-9