Operating Manual Vol 1 - ES Documentation

More documents

Recommendations

Info

$Print Preview - C:\DOCUME~1\f34892\LOCALS~1\Temp\.aptcache ...$

Enhanced Functions For Digital Standard 3GPP W-CDMA (FDD)SMIQ2.15.3.1 DownlinkFig. 2-166Menu DIGITAL STD-WCDMA/3GPP-ENHANCED CHANNEL (downlink)ENHANCEDCHANNELS STAT<strong>ES</strong>witch for activating or deactivating the calculation of up to 4 enhancedchannels on DGEN.In the OFF state, all the following menu parameters no longer influence the3GPP W-CDMA signal which is only calculated in MCOD ARB.IEC/IEEE-bus command :SOUR:W3GP:BST:ENH:STAT ON1125.5555.03 2.240 E-9
SMIQEnhanced Functions For Digital Standard 3GPP W-CDMA (FDD)2.15.3.1.1 P-CCPCH/BCH with System Frame NumberIn addition to channel-coded reference measurement channels, test specifications for mobile or UEtests (see [1]) often stipulate a channel-coded P-CCPCH (BCH). With the Enhanced P-CCHCP/BCHState activated, the SMIQ can generate this test scenario.The SMIQ then offers one P-CCPCH and one DPCH instead of the 4 enhanced DPCHs in the StandardEnhanced mode (Enhanced P-CCHCP/BCH State Off).ENHANCED P-CCPCH/BCH (INCL.SFN) STATEThis switch enables one P-CCPCH/BCH and one DPCH to be generated asenhanced channels (OFF) instead of the 4 DPCHs.IEC/IEEE-bus command :SOUR:W3GP:BST:ENH:PCCP:STAT ONWith Enhanced P-CCHCP/BCH State On, this may affect the structure of the other operating menus:• The channel table under Specific Enhanced Channel Settings contains the P-CCPCH and aDPCH.• If the P-CCPCH is activated under Specific Enhanced Channel Settings, it will automatically begenerated with the sequence length 4096 frames (SFN period).• The maximum sequence length (SEQUENCE LENGTH DPCH) changes:- for symbol rates ≤ 30 ksps: 2044 frames- for symbol rates >30 ksps: 500 framesFig. 2-167Common Enhanced Channel Settings with Enhanced P-CCHCP/BCH State OnFig. 2-168Specific Enhanced Channel Settings with Enhanced P-CCHCP/BCH State On1125.5555.03 2.241E-9
Page 1:
Test and MeasurementDivisionOperati
Page 4 and 5:
Introduction on how to use the manu
Page 7 and 8:
SMIQContentsContents1 Preparation f
Page 9 and 10:
SMIQContents2.7.3.2 Preemphasis....
Page 11 and 12:
SMIQContents2.15 Enhanced Functions
Page 13 and 14:
SMIQContents2.29 Utilities.........
Page 16 and 17:
ContentsSMIQ3.7.4 Application of th
Page 18 and 19:
ContentsSMIQ5.3.9.2 AM Distortion .
Page 20 and 21:
ContentsSMIQC Annex C..............
Page 22 and 23:
ContentsSMIQFiguresFig. 1-1 SMIQ, v
Page 24 and 25:
ContentsSMIQFig. 2-81 Menu DIGITAL
Page 26 and 27:
ContentsSMIQFig. 2-168 DIGITAL STD
Page 28 and 29:
ContentsSMIQFig. 2-244 Menu MEM SEQ
Page 30 and 31:
Safety Instructions10. Ensure that
Page 33 and 34:
1125.5555.03 1.1E-7SMIQPutting into
Page 35 and 36:
1125.5555.03 1.3E-7SMIQFunctional T
Page 37 and 38:
SMIQFitting the Options1.3.2 Overvi
Page 39 and 40:
SMIQFitting the Options1.3.5 Option
Page 41 and 42:
SMIQFitting the OptionsFitting the
Page 43 and 44:
SMIQFitting the OptionsFitting the
Page 45 and 46:
SMIQFitting the OptionsX606 X605 X6
Page 47 and 48:
SMIQFitting the OptionsConnectorThe
Page 49 and 50:
SMIQFront Panel2 Operation2.1 Front
Page 51 and 52:
SMIQFront Panel2.1.2 Controls and I
Page 53 and 54:
SMIQFront Panel2 DATA INPUTUnit key
Page 55 and 56:
SMIQFront Panel3 MENU/VARIATIONRota
Page 57 and 58:
SMIQFront Panel4QQInput external mo
Page 59 and 60:
SMIQFront Panel7Brightness and cont
Page 61 and 62:
SMIQRear Panel2.1.3 Elements of the
Page 63 and 64:
SMIQRear Panel11PAR DATAPinDescript
Page 65 and 66:
SMIQRear Panel12DATA DATA Cut-out,
Page 67 and 68:
SMIQRear Panel15BER Interface for B
Page 69 and 70:
SMIQRear Panel20RF RF Cut-out, prov
Page 71 and 72:
SMIQBasic Operating StepsMenu field
Page 73 and 74:
SMIQBasic Operating StepsQuick sele
Page 75 and 76:
SMIQSample Setting for First Users2
Page 77 and 78:
SMIQSample Setting for First UsersO
Page 79 and 80:
SMIQSample Setting for First UsersO
Page 81 and 82:
SMIQList EditorDELETE LISTFUNCTIONO
Page 83 and 84:
SMIQList Editor2.2.11.3 Edition of
Page 85 and 86:
SMIQList EditorFILL ATPARAMETERMEMO
Page 87 and 88:
SMIQList EditorBlock function DELET
Page 89 and 90:
SMIQList EditorOperating stepsExpla
Page 91 and 92:
SMIQSave/Recall2.2.12 Save/Recall -
Page 93 and 94:
SMIQRF Frequency2.4 RF FrequencyThe
Page 95 and 96:
SMIQRF Level2.5 RF LevelThe RF leve
Page 97 and 98:
SMIQRF LevelEXCLUDE FROM RCL OFF Th
Page 99 and 100:
SMIQRF LevelMenu selection:LEVEL -
Page 101 and 102:
SMIQRF LevelMenu selection:LEVEL -
Page 103 and 104:
SMIQModulation - General2.6 Modulat
Page 105 and 106:
SMIQModulation - General2.6.2 LF Ge
Page 107 and 108:
SMIQAnalog Modulations2.7 Analog Mo
Page 109 and 110:
SMIQAnalog Modulations2.7.3 Frequen
Page 111 and 112:
SMIQAnalog Modulations2.7.4 Phase M
Page 113 and 114:
SMIQAnalog Modulations2.7.5 Pulse M
Page 115 and 116:
SMIQVector ModulationMenu selection
Page 117 and 118:
SMIQVector Modulation2.8.1 I/Q Impa
Page 119 and 120:
SMIQFading Simulation2.9.1 Output P
Page 121 and 122:
SMIQFading Simulation2.9.4.1 Menu S
Page 123 and 124:
SMIQFading SimulationPATHThe follow
Page 125 and 126:
SMIQFading SimulationCORR PATHSwitc
Page 127 and 128:
SMIQFading Simulation3GPP_BS_4.1.0_
Page 129 and 130:
SMIQFading Simulation2.9.4.3 Menu M
Page 131 and 132:
SMIQFading Simulation2.9.4.4 Menu B
Page 133 and 134:
SMIQFading Simulation2.9.5 Test pro
Page 135 and 136:
SMIQDigital Modulation2.10.1 Digita
Page 137 and 138:
SMIQDigital Modulation2.10.1.3 FSK
Page 139 and 140:
SMIQDigital ModulationDifferential
Page 141 and 142:
SMIQDigital ModulationControl Lists
Page 143 and 144:
Page 145 and 146:
SMIQDigital Modulation2.10.5.2 Exte
Page 147 and 148:
SMIQDigital Modulation2.10.6 Envelo
Page 149 and 150:
Page 151 and 152:
SMIQDigital Modulation(SOURCE... )
Page 153 and 154:
SMIQDigital Modulation(MODULATION..
Page 155 and 156:
SMIQDigital Modulation(FILTER...) F
Page 157 and 158:
SMIQDigital ModulationTRIGGER MODES
Page 159 and 160:
SMIQDigital Modulation(CLOCK...) CL
Page 161 and 162:
SMIQDigital Modulation(POWER RAMPCO
Page 163 and 164:
SMIQDigital Standard PHS2.11 Digita
Page 165 and 166:
SMIQDigital Standard PHS2.11.2 PN G
Page 167 and 168:
SMIQDigital Standard PHS2.11.5 Menu
Page 169 and 170:
SMIQDigital Standard PHSFREQPHS100.
Page 171 and 172:
SMIQDigital Standard PHSCLOCK...Ope
Page 173 and 174:
SMIQDigital Standard PHSSLOT ATTENU
Page 175 and 176:
SMIQDigital Standard PHS(SELECT SLO
Page 177 and 178:
SMIQDigital Standard PHS(SELECT SLO
Page 179 and 180:
SMIQDigital Standard IS-95 CDMATo g
Page 181 and 182:
SMIQDigital Standard IS-95 CDMA2.12
Page 183 and 184:
SMIQDigital Standard IS-95 CDMA2.12
Page 185 and 186:
SMIQDigital Standard IS-95 CDMAMODE
Page 187 and 188:
SMIQDigital Standard IS-95 CDMAREV
Page 189 and 190:
SMIQDigital Standard IS-95 CDMA(TRI
Page 191 and 192:
SMIQDigital Standard IS-95 CDMA(CLO
Page 193 and 194:
SMIQDigital Standard IS-95 CDMA(SAV
Page 195 and 196:
SMIQDigital Standard IS-95 CDMADATA
Page 197 and 198:
SMIQDigital Standard IS-95 CDMACHAN
Page 199 and 200:
SMIQ Digital Standard W-CDMA (NTT D
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
SMIQDigital Standard 3GPP W-CDMA (F
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238: SMIQDigital Standard 3GPP W-CDMA (F
Page 285 and 286: SMIQEnhanced Functions For Digital
Page 287: SMIQEnhanced Functions For Digital
Page 311 and 312: SMIQDigital Standard NADC2.16.1 Syn
Page 313 and 314: SMIQDigital Standard NADC2.16.3 Lis
Page 315 and 316: SMIQDigital Standard NADC(MODULATIO
Page 317 and 318: SMIQDigital Standard NADC(TRIGGER..
Page 319 and 320: SMIQDigital Standard NADC(POWER RAM
Page 321 and 322: SMIQDigital Standard NADCRATECONFIG
Page 323 and 324: SMIQDigital Standard NADC(SELECT SL
Page 325 and 326: SMIQDigital Standard NADC(SELECT SL
Page 327 and 328: SMIQDigital Standard PDC2.17 Digita
Page 329 and 330: SMIQDigital Standard PDC2.17.2 PN G
Page 331 and 332: SMIQDigital Standard PDC2.17.5 Menu
Page 333 and 334: SMIQDigital Standard PDCEXECUTETRIG
Page 335 and 336: SMIQDigital Standard PDC(CLOCK...)
Page 337 and 338: SMIQDigital Standard PDCFREQPHS100.
Page 339 and 340:
SMIQDigital Standard PDC(SELECT SLO
Page 341 and 342:
Page 343 and 344:
Page 345 and 346:
Page 347 and 348:
Page 349 and 350:
SMIQDigital Standard GSM/EDGE2.18 D
Page 351 and 352:
SMIQDigital Standard GSM/EDGE2.18.2
Page 353 and 354:
SMIQDigital Standard GSM/EDGE2.18.5
Page 355 and 356:
SMIQDigital Standard GSM/EDGEEXECUT
Page 357 and 358:
SMIQDigital Standard GSM/EDGEFig. 2
Page 359 and 360:
SMIQDigital Standard GSM/EDGE(SAVE/
Page 361 and 362:
SMIQDigital Standard GSM/EDGE(SELEC
Page 363 and 364:
SMIQDigital Standard GSM/EDGEMenu s
Page 365 and 366:
SMIQDigital Standard GSM/EDGE(SELEC
Page 367 and 368:
SMIQDigital Standard DECT2.19.1 Syn
Page 369 and 370:
SMIQDigital Standard DECT2.19.3 Lis
Page 371 and 372:
SMIQDigital Standard DECT(MODULATIO
Page 373 and 374:
SMIQDigital Standard DECT(TRIGGER..
Page 375 and 376:
SMIQDigital Standard DECTPOWER RAMP
Page 377 and 378:
SMIQDigital Standard DECT(SAVE/RCL
Page 379 and 380:
SMIQDigital Standard DECT(SELECT SL
Page 381 and 382:
SMIQDigital Standard DECT(SELECT SL
Page 383 and 384:
SMIQDigital Standard GPSFor more de
Page 385 and 386:
SMIQDigital Standard GPSTRIGGER...E
Page 387 and 388:
SMIQDigital Standard GPSPATTERNDATA
Page 389 and 390:
SMIQArbitrary Waveform Generator AR
Page 391 and 392:
Page 393 and 394:
Page 395 and 396:
Page 397 and 398:
Page 399 and 400:
Page 401 and 402:
Page 403 and 404:
Page 405 and 406:
SMIQExternal Modulation Source AMIQ
Page 407 and 408:
Page 409 and 410:
Page 411 and 412:
Page 413 and 414:
Page 415 and 416:
Page 417 and 418:
SMIQBit Error Rate Test2.23.1 Bit E
Page 419 and 420:
SMIQBit Error Rate TestPRBSDATA POL
Page 421 and 422:
SMIQBit Error Rate Test2.23.1.2 Sig
Page 423 and 424:
SMIQBit Error Rate TestBER measurem
Page 425 and 426:
SMIQBit Error Rate TestPossible Pro
Page 427 and 428:
SMIQBit Error Rate TestSTATEMODEEXE
Page 429 and 430:
SMIQBit Error Rate Testreliable BLE
Page 431 and 432:
SMIQNoise Generator and Distortion
Page 433 and 434:
Page 435 and 436:
Page 437 and 438:
Page 439 and 440:
SMIQLF Output2.25 LF OutputThe inte
Page 441 and 442:
SMIQSweep2.26.2 Selecting the Sweep
Page 443 and 444:
SMIQSweepMARKERThis output becomes
Page 445 and 446:
SMIQSweepSTEP LIN (LOG)DWELLInput v
Page 447 and 448:
SMIQSweepRESET SWEEPSets the starti
Page 449 and 450:
SMIQLIST Mode2.27 LIST ModeA sequen
Page 451 and 452:
SMIQLIST ModeMARKER At the first st
Page 453 and 454:
SMIQLIST ModeThe second page of the
Page 455 and 456:
SMIQMemory SequenceOperating Modes
Page 457 and 458:
SMIQMemory SequenceThe second page
Page 459 and 460:
SMIQUtilities2.29.2 Parameter of th
Page 461 and 462:
SMIQUtilities2.29.4 Suppressing Ind
Page 463 and 464:
SMIQUtilitiesEXT FREQUENCYInput val
Page 465 and 466:
SMIQUtilities2.29.9 Calibration (CA
Page 467 and 468:
SMIQUtilitiesCalibration VECTOR MOD
Page 469 and 470:
SMIQUtilitiesCalibration ALC TABLEF
Page 471 and 472:
SMIQUtilitiesCalibration LFGENCalib
Page 473 and 474:
SMIQUtilities2.29.11 Voltage Indica
Page 475 and 476:
SMIQUtilities2.29.13 Indications of
Page 477 and 478:
SMIQUtilities2.29.16 Setting Auxili
Page 479 and 480:
SMIQUtilities2.29.18 Installation o
Page 481:
SMIQError Messages2.32 Error Messag
Page 484 and 485:
IndexSMIQvalue range ..............
Page 486 and 487:
IndexSMIQDisplaybrightness.........
Page 488 and 489:
IndexSMIQBIT CLOCK ................
Page 490 and 491:
IndexSMIQadditional................
Page 492 and 493:
IndexSMIQQAM modulation............
Page 494 and 495:
IndexSMIQbroadband AM..............
show all

Operating Manual Vol 1 - ES Documentation

Create successful ePaper yourself

Delete template?

Save as template?