Operating Manual Vol 1 - ES Documentation

SMIQList EditorBlock function DELETEFunction DELETE deletes the elements of the range indicated. This does not leave a gap in the list butthe remaining elements move forward. If the given range exceeds the end of the list, deletion until theend of the list is effected.Input is analog to filling a list.By pressing the [RETURN] key, the input window is exited without a modification being carried out. Themenu cursor then marks FUNCTION.Selection:Function DELETEFREQ100. 000 000 0 MHz LEVEL- 30.0 dBmFREQUENCYLEVELANALOG MODVECTOR MODDIGITAL MODDIGITAL STDLF OUTPUTSWEEPLISTMEM SEQUTILITIESSELECT LIST...FUNCTION-INDEX - FREE 256 - LEN 1000010002000300040005000600070008DELETE AT 10 RANGE 2EXECUTEFig. 2-13Edit function DELETE: Input windowDELETE ATEXECUTEInput of the block of the list to be deletedAT Lower limit (INDEX)RANGE Number of elements to be deleted.Starts the deletion. After the function has been executed, the input window isautomatically exited. The menu cursor marks FUNCTION. The EDIT pageshows the beginning of the range that has moved forward.2.2.11.4 Pattern Setting to Operate the List EditorThe user can become familiar with the operation of the list editor by means of the following patternsetting in the MEM SEQ menu. A list has to be generated and filled with values by using the single-valuefunction EDIT/VIEW:• Memory location number of the first element 20• Dwell time of the first element15 s• Memory location number of the second element 7.When the setting has been terminated, return to the OPERATION page of the MEM SEQ menu.1125.5555.03 2.39 E-8