Operating Manual Vol 1 - ES Documentation

Memory SequenceSMIQMenu selection:MEM SEQFREQ100. 000 000 0 MHz LEVEL -30.0 dBmFREQUENCYLEVELANALOG MODVECTOR MODDIGITAL MODDIGITAL STDLF OUTPUTSWEEPLISTMEM SEQUTILITIESMODERESET SEQUENCECURRENT INDEXSELECT LIST...DELETE LIST...FUNCTIONOFF AUTO SINGLE STEP EXT-SINGLE EXT-STEPFILLINSERTDELETE1CURRENT: MSEQ1EDIT/VIEWFig. 2-252Menu MEM SEQ -OPERATION-page (preset setting)MODESelection of the operating mode; setting the operating moderegards various command systems at the IEC bus (cf. above).EXECUTE SINGLE SEQUENCERESET SEQUENCECURRENT INDEXSELECT LIST...DELETE LIST...Starts the single run of a memory sequence. This menu option isonly visible if MODE SINGLE is selected.IEC/IEEE-bus command :TRIG:MSEQWrap to the beginning of the list.IEC/IEEE-bus command :ABOR:MSEQIndication of the current list index. Setting value of the current listindex in the MODE STEP operating mode.Selection of a list or generation of a new list (cf. Section 2.2.4, ListEditor).IEC/IEEE-bus command :SYST:MSEQ:SEL "MSEQ1"Deletion of a list (cf. Section 2.2.4, List Editor).IEC/IEEE-bus command :SYST:MSEQ:DEL "MSEQ2"FUNCTION Selection of the editor functions to process a list (cf. Section 2.2.4,List Editor).IEC/IEEE-bus command :SYST:MSEQ 9,2,...;:SYST:MSEQ:DWEL 50ms, 50ms,.1125.5555.03 2.408E-9