Operating Manual Vol 1 - ES Documentation

Digital Standard PHSSMIQ(TRIGGER...)EXT TRIGGERDELAYEXT RETRIGGERINHIBITSetting the number of symbols by which an externaltrigger signal is delayed before it starts the PHSsignal generation.This is used for setting the time synchronizationbetween the the SMIQ and the DUT.IEC/IEEE-bus command :SOUR:PHS:TRIG:DEL 3Setting the number of symbols for which a restart isinhibited after a trigger event.With TRIGGER MODE RETRIG selected, each newtrigger signal restarts the PHS signal generation. Thisrestart can be inhibited for the entered number ofsymbols.Example:The entry of 1000 symbols causes new triggersignals to be ignored for the duration of 1000 symbolsafter a trigger eventIEC/IEEE-bus :SOUR:PHS:TRIG:INH 1000TRIGGER OUT 2DELAYInput value of delay of trigger signal at TRIGOUT 2output compared with beginning of frame.IEC/IEEE-bus :SOUR:PHS:TRIG:OUTP:DEL 2TRIGGER OUT2PERIODInput value of output signal period at TRIGOUT 2output given in frames.IEC/IEEE-bus :SOUR:PHS:TRIG:OUTP:PER 11125.5555.03 2.122E-9