Operating Manual Vol 1 - ES Documentation

Digital Standard DECTSMIQ(SELECT SLOT)PROLONGEDPREAMBLESYNCA FIELD DATAInput value for the PROLONGED PREAMBLE in binaryformat. According to the DECT standard, the default settingfor this 32-bit data field is different for uplink and downlinkslots. This data field is not available for slot type ALL_DATA.IEEE :SOUR:DECT:SLOT2:PRE:PROL:DATA #B1010...Input value for the 16-bit data field SYNC in binary format.According to the DECT standard, the default setting for this32-bit data field is different for uplink and downlink slots. Thisdata field is not available for slot type ALL_DATA.IEEE :SOUR:DECT:SLOT2:SYNC #B1001...Selection of the data source for the A FIELD. The 64-bit Adata field is only displayed for the slot types FULL andDOUBLE.PN.. PRBS data according to CCITT V52 or Rec.0.151 with period lengths between 2 9 -1 and2 23 -1.IEEE bus :SOUR:DECT:SLOT3:AFI PN15DLIST Data from a programmable list.IEEE bus :SOUR:DECT:SLOT3:AFI DLIS"name":SOUR:DECT:SLOT3:AFI DLISSERDATA Data fed in via the entry SER DATA.IEEE-bus :SOUR:DECT:SLOT3:AFI SDATB FIELD DATASelection of the data source for the B FIELD. The B datafield is only displayed for the slot types FULL and DOUBLE.Its length is 320 bits for full slot and 800 bits for double slot.PN.. PRBS data according to CCITT V52 or Rec.0.151 with period lengths between 2 9 -1 and2 23 -1.IEE-bus :SOUR:DECT:SLOT3:BFI PN15DLIST Data from a programmable list.IEEE-bus :SOUR:DECT:SLOT3:BFI DLIS"name":SOUR:DECT:SLOT3:BFI DLISSERDATA Data fed in via the entry SER DATA.IEEE-bus :SOUR:DECT:SLOT3:BFI SDAT1125.5555.03 2.332E-9