Operating Manual Vol 1 - ES Documentation

Digital Standard PDCSMIQ(TRIGGER...)EXT RETRIGGERINHIBITTRIGGER OUT 2DELAYTRIGGER OUT2PERIODSetting the number of symbols for which a restart isinhibited after a trigger event.With TRIGGER MODE RETRIG selected, each newtrigger signal restarts the PDC signal generation.This restart can be inhibited for the entered numberof symbols.Example:The entry of 1000 symbols causes new triggersignals to be ignored for the duration of 1000 symbolsafter a trigger eventIEC/IEEE-bus :SOUR:PDC:TRIG:INH 1000Input value of delay of trigger signal at TRIGOUT 2output compared with beginning of frame.IEC/IEEE-bus :SOUR:PDC:TRIG:OUTP:DEL 2Input value of output signal period at TRIGOUT 2output given in frames.IEC/IEEE-bus :SOUR:PDC:TRIG:OUTP:PER 1CLOCK...Opens a window for selecting the clock source and for setting a delay.FREQPDC100. 000 000 0 MHzLEVEL -30.0 dBmPEP - 27.4 dBmFREQUENCYLEVELANALOG MODVECTOR MODDIGITAL MODDIGITAL STDLF OUTPUTSWEEPLISTMEM SEQUTILITIESPHSIS95NADCPDCGSMSTATECLOCK SOURCE INT EXTMODULATION... MODE SYMBOL BITTRIGGER MODEEXECUTE TRIGTRIGGER....CLOCK...POWER RAMP C>SLOT ATENUADELAY0.00 Symb0TCHFig. 2-188Menu DIGITAL STD - PDC - CLOCK..., SMIQ equipped with Modulation Coder SMIQB20and Data Generator SMIQB111125.5555.03 2.286 E-9