Operating Manual Vol 1 - ES Documentation

SMIQUtilitiesEXT FREQUENCYInput value of the external reference frequency (1 MHz to 16 MHz,spacing 1 MHz).IEC/IEEE-bus command SOUR:ROSC:EXT:FREQ 10E6ADJUSTMENT STATE OFF Tuning value of the internal reference frequency ascalibrated (cf. menu UTILITIES-CALIB)ON Tuning value according to setting value FREQUENCYADJUSTMENT. Option SM-B1, reference oscillatorOCXO, is switched off. Only the standard referenceoscillator is in operation.IEC/IEEE-bus command SOUR:ROSC:ADJ:STAT ONFREQUENCY ADJUSTMENTInput value in the range 0 to 4095 to set the internal referencefrequency. Pulling range ±4×10 -6IEC/IEEE-bus command SOUR:ROSC:ADJ:VAL 20482.29.7 Phase of the Output Signal (PHASE)Menu UTILITIES-PHASE offers access to the phase setting of the RF output signal with respect to areference signal of the same frequency.Menu selection:UTILITIES - PHASEFREQ100. 000 000 0MHz LEVEL - 30.0 dBmFREQUENCYLEVELANALOG MODVECTOR MODDIGITAL MODDIGITAL STDLF OUTPUTSWEEPLISTMEM SEQUTILITIESSYSTEMREF OSCPHASEPROTECTCALIBDIAGTESTMOD KEYAUX I/OBEEPERINSTALLDELTA PHASERESET DELTA PHASE DISPLAY0 degFig. 2-259Menu UTILITIES - PHASE (preset setting)DELTA PHASESetting value of the phase.IEC/IEEE-bus command:SOUR:PHAS 10 DEGRESET DELTA PHASE DISPLAYSets the display of the DELTA PHASE to 0 without the phase ofthe output signal being influenced.IEC/IEEE-bus command :SOUR:PHAS:REF1125.5555.03 2.415 E-9