Operating Manual Vol 1 - ES Documentation

SMIQDigital Standard DECT(SELECT SLOT) DATA Selection of the data source for the 424-bit data field DATA.The B data field is only displayed for the slot typeALL_DATA.PN.. PRBS data according to CCITT V52 or Rec.0.151 with period lengths between 2 9 -1 and2 23 -1.IEEE-bus :SOUR:DECT:SLOT3:DATA PN15DLIST Data from a programmable list.IEEE-bus :SOUR:DECT:SLOT3:DATA DLIS"name":SOUR:DECT:SLOT3:DATA DLISSERDATA Data fed in via the entry SER DATA.IEEE-bus :SOUR:DECT:SLOT3:DATA SDATXZGUARDSELECT DATALIST...COPY CURRENTDATA LIST TO...DELETE DATALIST...EDIT DATALIST...This 4-bit data field can not be edited. It contains a CRC(Cyclic Redundancy Code) generated from the data in the Bdata field according to the DECT standard. This data field isnot available for slot type ALL_DATA.Switches the Z field on and off. This function is available forthe slot types FULL and DOUBLE.ON The CRC (Cyclic Redundancy Code) generatedfor the X field is repeated in the 4-bit datafield Z.OFF The Z field is not activated. The guard field isextended by 4 bits.IEEE-bus command :SOUR:DECT:SLOT2:ZFI ONThis data field can not be edited and contains zero data. Atthe beginning of the GUARD field, the power ramp of theactive slot starts falling.Opens a window for selecting a stored data list or forgenerating a new list.Stores the current data list under a different name.Deletes a data list.Opens a window for editing a data list bit-by-bit. Theavailable storage capacity and the length of the current list isdisplayed in parameters FREE and LEN (see also SectionList Editor).COPY Copies a list rangeFILL Fills the range with filler patternINSERT Inserts a list range at a different position of thelistDELETE Deletes a list rangeEDIT/VIEW Edits or views the list1125.5555.03 2.333 E-9