Operating Manual Vol 1 - ES Documentation

Enhanced Functions For Digital Standard 3GPP W-CDMA (FDD)SMIQPOWER[dB]POW MAPOWER CONTROL = DOWNPOWER CONTROL = UPPOWERSTARTCH 0CH 1CH 2CH 3POWERUPRANGEPOWER STEPPOWERDOWNRANGEPOW MINDownUpExternalPowerControlSignal{0;1}MAP M-2MAP M+2MAP M-1 MAP M+1MAP MMAP 0,DOWNMAP X,UMappingTableFig. 2-171Change of channel power of 4 enhanced channels----------------------External Power Control-----------------------------------------------------------------------------EXTERNAL POWERCONTROL STATEPOWER STEPSwitch for activating or deactivating the external power control mechanism ofall enhanced channels.In the OFF state, the following menu parameters are not effective:POWER UP RANGE,POWER DOWN RANGE,POWER STEP,POWER CONTROL GRAPH ?,POWER START DPCCH,POWER START DPDCH,POWER START (enhanced channel-specific).POWER CONTROL (enhanced channel-specific).IEC/IEEE-bus command :SOUR:W3GP:BST:ENH:EPOW:STAT ONStep width (0.25 to 6.0 dB) by which – with the external power controlmechanism being switched on - the channel powers of the activated enhancedchannels in the timeslot grid are increased or decreased within the setdynamic range.IEC/IEEE-bus command :SOUR:W3GP:BST:ENH:EPOW:STEP 1.01125.5555.03 2.246 E-9