Operating Manual Vol 1 - ES Documentation

SMIQList Editor2.2.11.3 Edition of ListsDue to the selection of an edit mode on the OPERATION page the EDIT page is automatically activated.When the EDIT/VIEW function is selected, the largest possible section of the list is displayed (cf. Fig.2-10). In the case of block functions FILL, INSERT and DELETE, an input window is additionallydisplayed (cf. Fig. 2-11 to 2-13).Functions SELECT LIST and FUNCTION are available on the EDIT page as on the OPERATION page.Return to the OPERATION page is effected by pressing the [SELECT] key twice.Single-value function EDIT/VIEWBy selecting the EDIT/VIEW function, the entire list can be viewed or modifications of single values becarried out.If the cursor marks a value in the INDEX column of the list, the EDIT mode is exited by pressing the[RETURN] key. The menu cursor then marks FUNCTION again.There is no separate function for storing the list. This means that every modification of the list istransferred to the internal data set and has an effect on exiting the EDIT/VIEW function.Menu selection: FUNCTION EDIT/VIEWFREQ100. 000 000 0 MHz LEVEL-30.0 dBmFREQUENCYLEVELANALOG MODVECTOR MODDIGITAL MODDIGITAL STDLF OUTPUTSWEEPLISTMEM SEQUTILITIESSELECT LIST...CURRENT: MSEQ2FUNCTIONFILL INSERT DELETE EDIT/VIEW-INDEX - FREE 246 - LEN 10 MEMORY DWELL0001 09 50 ms0002 02 50 ms0003 01 60 ms0004 23 60 ms0005 09 85 ms0006 10 85 ms0007 08 85 ms0008 11 85 msFig. 2-10INDEXFREELENEdit function EDIT/VIEWPosition in the listSpace available. FREE 256 means that space for 256 parameter elements isavailable in the list memory in total.Occupied space. LEN 0 means that the current list occupies 0 elements in thelist memory.MEMORY DWELLIdentification of the column below. The number and name of parametercolumns is different for the various list editors.1125.5555.03 2.35 E-8