Operating Manual Vol 1 - ES Documentation

Digital Standard NADCSMIQ(SELECT SLOT...)SHORT(UPLINK ONLY)SLOT LEVELSelection of level for selected slot.OFF Maximum attenuationIEC/IEEE :SOUR:NADC:SLOT2:LEV OFFFULL The level corresponds to the value indicated onthe SMIQ LEVEL display.IEC/IEEE :SOUR:NADC:SLOT2:LEV FULLATTEN The level is reduced by the value set underSLOT ATTENUATION.IEC/IEEE :SOUR:NADC:SLOT2:LEV ATTSET DEFAULTGRSYNCResets the subsequent parameters to the factory-set values.IEC/IEEE-bus command :SOUR:NADC:SLOT8 PRESDisplay of data contents in the 6 bit data field "Guard" inhexadecimal form.Display of data contents in the 6 bit data field "Ramp" inhexadecimal form..Input value for the sync word in hexadecimal form.Depending on the selected slot, the following sync words arepredefined according to the NADC standard:SLOT 1 A91DE4ASLOT 2 A9D127ASLOT 3 C7E3C0CSLOT 4 342C3F3SLOT 5 13E23D1SLOT 6 DC2EC1DIEC/IEEE-bus :SOUR:NADC:SLOT2:SYNC A91EE4ACDVCCInput value for the 12 bit "Coded digital verification colorcode" field in hexadecimal form. SMIQ does not perform anycoding but directly accepts the input data. 013 hex. is preset.This corresponds to a value of 1 for the uncoded colour codeDVCC.IEC/IEEE-bus :SOUR:NADC:SLOT2:CDVC #HFFFV, W, X, Y Display of data contens of other data fields that arepredefined by the NADC standard.G2Display of data contents in the second "Guard" inhexadecimal form.Parameter SELECT DATA LIST... to EDIT DATA LIST...see menu selection BURST TYPE = TCH1125.5555.03 2.278E-9