Operating Manual Vol 1 - ES Documentation

Digital Standard PDCSMIQ(SELECT SLOT...)TCHRCH POSITIONRPDATAInput value for the position of the second RCH block. Theinput field is only displayed if SUPERFRAME is switched on.IEC/IEEE-bus :SOUR:PDC:SLOT2:SFR:RCHP 10Display of data contents in the 4 bit data field "RAMP" inhexadecimal form.Input value of the 2 bit data field "Preamble".IEC/IEEE-bus :SOUR:PDC:SLOT2:PRE #H1Selection of data source for DATA fields. These fields areregarded as a continuous field, ie a pseudo-randomsequence is fully continued from one DATA field to the next.The following data sources are available:PN.. PRBS data according to CCITT with periodsbetween 2 9 -1 and 2 23 -1.IEC/IEEE :SOUR:PDC:SLOT3:DATA PN15DLIST Data from a programmable data list.IEC/IEEE :SOUR:PDC:SLOT3:DATA DLISSERDATA Data from data input SER DATA.IEC/IEEE :SOUR:PDC:SLOT3:DATA SDATSYNCInput value for the 20 bit sync word in hexadecimal form.Depending on the selected slot the LINK DIRECTION, thefollowing sync words are predefined according to the PDCstandard:Slot No. Downlink Sync Word Uplink Sync Word0 87A4B 785B41 9D236 62DC92 81D75 7E28A3 A94EA 56B154 5164C AE9B35 4D9DE B2621According to the standard, the sync words of the uplink arethe inverted sync words of the downlink.IEC/IEEE-bus :SOUR:PDC:SLOT2:SYNC #H62DC81125.5555.03 2.292 E-9