Operating Manual Vol 1 - ES Documentation

SMIQDigital Modulation(SOURCE... ) EDIT DATA LIST Opens a window for editing a data list bit-by-bit. Theavailable storage capacity and the length of thecurrent list is displayed in parameters FREE and LEN(see also Section List Editor).COPY Copies a list rangeFILL Fills the range with filler patternINSERT Inserts a list range at a differentposition of the listDELETE Deletes a list rangeEDIT/VIEW Edits or views the listCONTROL STATE ON The signals from the selectedCONTROL LIST are effective.OFF The signals are not effectiveIEC/IEEE-bus :SOUR:DM:CLIS:CONT ONSELECT CONTROLLISTOpens a window for selecting a stored list for controlsignals or for generating a new list for control signals.IEC/IEEE-bus :SOUR:DM:CLIS:SEL ´name´COPY CURRENTCONTROL LIST TOStores the current list for control signals under adifferent name.IEC/IEEE-bus :SOUR:DM:CLIS:COPY ´name´DELETE CONTROLLISTEDIT CONTROL LISTDeletes a list for control signals.Opens a window for editing a list for control signalssymbol-by-symbol. The available storage capacityand the length of the current list is displayed inparameters FREE and LEN (see also Section ListEditor).COPY Copies a list rangeDELETE Deletes a list rangeEDIT/VIEW Edits or views the listDELETE ALL DATAAND CONTROLLISTSDeletes all data lists and lists for control signals.IEC/IEEE-bus -1125.5555.03 2.103E-9