Operating Manual Vol 1 - ES Documentation

SMIQList EditorFILL ATPARAMETERMEMORYor DWELLWITH INCREMENTEXECUTEFilling a listSetting the filling range.AT Lower limit (index)RANGE Number of the elements to be insertedSelection on which of the parameters the filling function is to have an effect.This menu option is eliminated if the list only includes elements with oneparameter.Input of the starting value for the parameter selected. This option is onlydisplayed if a selection has been made under PARAMETER MEMORY orDWELL.Input of the increment between two successive values. If 0 is entered asincrement, a filling procedure with constant values is achieved. This option isonly displayed if a selection has been made under PARAMETER MEMORY orDWELL.Note: In the case of some types of lists, e.g. digital modulation data, indicatingan increment is eliminated since there are binary data. In these casesline WITH INCREMENT is eliminated.Starts the filling sequence. After the function has been executed, the inputwindow is automatically exited. The current index points to the first elementafter the processed range.After selection of function FILL, the menu cursor marks FILL AT. Press the [SELECT] key.The menu cursor marks the value at AT. Vary index value using the rotary knob or enter using the numeric keys andthe [ENTER] key. Press the [SELECT] key.The menu cursor marks the value at RANGE. Vary value using the rotary knob or enter using the numeric keys and the[ENTER] key. Press the [SELECT] key.The menu cursor marks MEMORY or DWELL in input line PARAMETER. Select MEMORY using the rotary knob (if not yet marked) and press the[SELECT] key.The menu cursor marks the value in input line MEMORY. Vary starting value for column MEMORY using the rotary knob or enterusing the numeric keys and the [ENTER] key. Press the [SELECT] keyThe menu cursor marks the value in input line WITH INCREMENT. Vary the value of the increment desired using the rotary knob or enter usingthe numeric keys and the [ENTER] key. Press the [RETURN] key. Mark the action EXECUTE Press the [SELECT] key.The filling sequence is initiated. After the function has been carried out, theinput window is automatically exited. The menu cursor marks FUNCTION.The EDIT page shows the end of the range that has been filled right now.1125.5555.03 2.37 E-8