Operating Manual Vol 1 - ES Documentation

SMIQBit Error Rate Test2.23.1 Bit Error Rate Measurement with PN Sequences (BER)2.23.1.1 Operating MenuIn the operating menu, the configuration for the BER measurement is made and the results aredisplayed.Fig. 2-235Operating menu for BER measurementIn the upper section of the menu (display area), the measurement results are displayed together with theway in which they have been established, and additional information on the applied signal. In the lowersection, settings can be made.BIT ERROR RATE(BER)Cyclic display of the measured bit error rate, the ratio of detected errors totransmitted data bits.DATA BITSNumber of transmitted data bits.ERRORSNumber of detected errors.TERMINATED BYThe displayed measurement result was obtained as follows:NUMBER OF DATA BITS The defined number of data bits was reached.NUMBER OF ERRORS The defined number of errors was detected.USERThe measurement was interrupted manually bythe user.---- Measurement in progress.1125.5555.03 2.369 E-9